X-Git-Url: https://feistymeow.org/gitweb/?a=blobdiff_plain;f=scripts%2Frev_control%2Fversion_control.sh;h=000c3c61b7903d2ea12403dc7dc0f74858fdf77e;hb=e7032503c003871e7e2bb172e6b111710349eeba;hp=38f26770698924a9a420d84cc4fb158491f0f3c7;hpb=4028c96f710034a0172c829ebb1b7dce3d4b3dbd;p=feisty_meow.git

diff --git a/scripts/rev_control/version_control.sh b/scripts/rev_control/version_control.sh
index 38f26770..000c3c61 100644
--- a/scripts/rev_control/version_control.sh
+++ b/scripts/rev_control/version_control.sh
@@ -9,8 +9,6 @@
 source "$FEISTY_MEOW_SCRIPTS/core/launch_feisty_meow.sh"
 source "$FEISTY_MEOW_SCRIPTS/tty/terminal_titler.sh"
 
-#hmmm: we need to dump all the outputs in this script into splitter
-
 ##############
 
 # the maximum depth that the recursive functions will try to go below the starting directory.
@@ -78,10 +76,7 @@ function do_checkin()
     if test_writeable ".git"; then
       $blatt
 
-# classic implementation, but only works with one master branch.
-# fixes will be forthcoming from development branch.
-
-      # snag all new files.  not to everyone's liking.
+      # put all changed and new files in the commit.  not to everyone's liking.
       git add --all .
       test_or_die "git add all new files"
 
@@ -92,31 +87,15 @@ function do_checkin()
         test_or_die "git commit"
       fi
 
-#      # upload the files to the server so others can see them.
-#      git push 2>&1 | grep -v "X11 forwarding request failed"
-#      if [ ${PIPESTATUS[0]} -ne 0 ]; then false; fi
-#      test_or_die "git push"
-
-      # catch if the diff-index failed somehow.
-      test_or_die "git diff-index"
+      # a new set of steps we have to take to make sure the branch integrity is good.
+      careful_git_update 
 
       # we continue on to the push, even if there were no changes this time, because
       # there could already be committed changes that haven't been pushed yet.
 
-      local myself="$(my_branch_name)"
-#      local parent="$(parent_branch_name)"
-
       # upload any changes to the upstream repo so others can see them.
-
-#      if [ "$myself" != "$parent" ]; then
-#        git push origin "$(myself)" 2>&1 | grep -v "X11 forwarding request failed" | $TO_SPLITTER
-#        test_or_die "git push to origin: $myself"
-#      else
-#        # this branch is the same as the parent, so just push.
-
-        git push 2>&1 | grep -v "X11 forwarding request failed" | $TO_SPLITTER
-        test_or_die "git push"
-#      fi
+      git push 2>&1 | grep -v "X11 forwarding request failed" | $TO_SPLITTER
+      test_or_die "git push"
 
     fi
   else
@@ -127,7 +106,7 @@ function do_checkin()
 
   restore_terminal_title
 
-  true;
+  return 0
 }
 
 # shows the local changes in a repository.
@@ -155,7 +134,7 @@ function do_diff
 
   restore_terminal_title
 
-  true;
+  return 0
 }
 
 # reports any files that are not already known to the upstream repository.
@@ -183,7 +162,7 @@ function do_report_new
 
   restore_terminal_title
 
-  true
+  return 0
 }
 
 # checks in all the folders in a specified list.
@@ -292,65 +271,39 @@ sep
 
 # the git update process just gets more and more complex when you bring in
 # branches, so we've moved this here to avoid having a ton of code in the
-# do_checkin method.
+# other methods.
 function careful_git_update()
 {
-
-echo A
-  this_branch="$(my_branch_name)"
-
-#we want my branch here, don't we?  not like parent or anything?
-  check_branch_state "$this_branch"
-  state=$?
-  test_or_continue "branch state check"
-  echo the branch state is $state
-#need to instead do something here if fails.
-
-echo B
+  local this_branch="$(my_branch_name)"
+
+#appears to be useless; reports no changes when we need to know about remote changes that do exist:
+#  check_branch_state "$this_branch"
+#  state=$?
+#  test_or_continue "branch state check"
+#  echo the branch state is $state
+
+  # the above are just not enough.  this code is now doing what i have to do when i repair the repo.
+  local branch_list=$(git branch |grep -v '^\*')
+  local bran
+  for bran in $branch_list; do
+    echo "synchronizing remote branch: $bran"
+    git checkout "$bran"
+    test_or_die "git checking out remote branch: $bran"
+    git pull --no-ff
+    test_or_die "git pull of remote branch: $bran"
+  done
+  # now switch back to our branch.
+  git checkout "$this_branch"
+  test_or_die "git checking out our current branch: $this_branch"
 
   # first update all our remote branches to their current state from the repos.
   git remote update
   test_or_die "git remote update"
 
-echo C
   # now pull down any changes in our own origin in the repo, to stay in synch
   # with any changes from others.
   git pull --no-ff --all
   test_or_die "git pulling all upstream"
-
-echo D
-#the above are just not enough.  now doing what i have to do to repair things.
-branch_list=$(git branch |grep -v '^\*')
-
-
-echo E
-
-echo The rest of pull is not being done yet.
-return 1
-
-
-
-# below has older shards of partial knowledge.
-
-#      reslog=$(git log HEAD..origin/master --oneline)
-#      if [[ "${reslog}" != "" ]] ; then
-#        git merge origin/master
-
-#      # from very helpful page:
-#      # https://stackoverflow.com/questions/10312521/how-to-fetch-all-git-branches
-#      for remote in $( git branch -r | grep -v -- '->' ); do
-#        git branch --track ${remote#origin/} $remote 2>/dev/null
-##hmmm: ignoring errors from these, since they are continual.
-##hmmm: if we could find a way to not try to track with a local branch when there's already one present, that would be swell.  it's probably simple.
-#      done
-#
-##hmmm: well, one time it failed without the fetch.  i hope that's because the fetch is actually needed and not because the whole approach is fubar.
-#      git fetch --all 2>&1 | grep -v "X11 forwarding request failed" | $TO_SPLITTER
-#      test_or_die "git fetch"
-#
-#      git pull --all 2>&1 | grep -v "X11 forwarding request failed" | $TO_SPLITTER
-#      test_or_die "git pull"
-
 }
 
 # gets the latest versions of the assets from the upstream repository.
@@ -383,17 +336,9 @@ function do_update()
   elif [ -d ".git" ]; then
     if test_writeable ".git"; then
       $blatt
-
-# classic implementation, but only works with one master branch.
-# fixes will be forthcoming from development branch.
-
-#      git pull 2>&1 | grep -v "X11 forwarding request failed" | $TO_SPLITTER
-#      if [ ${PIPESTATUS[0]} -ne 0 ]; then false; fi
-#      test_or_die "git pull"
-
-#any parms needed?
-      careful_git_update 
-
+      git pull --no-ff origin 2>&1 | grep -v "X11 forwarding request failed" | $TO_SPLITTER
+      if [ ${PIPESTATUS[0]} -ne 0 ]; then false; fi
+      test_or_die "git pull of origin without fast forwards"
     fi
   else
     # this is not an error necessarily; we'll just pretend they planned this.
@@ -403,7 +348,7 @@ function do_update()
 
   restore_terminal_title
 
-  true
+  return 0
 }
 
 # gets all the updates for a list of folders under revision control.