+++ /dev/null
-#ifndef __CURL_CURL_H
-#define __CURL_CURL_H
-/***************************************************************************
- * _ _ ____ _
- * Project ___| | | | _ \| |
- * / __| | | | |_) | |
- * | (__| |_| | _ <| |___
- * \___|\___/|_| \_\_____|
- *
- * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
- *
- * This software is licensed as described in the file COPYING, which
- * you should have received as part of this distribution. The terms
- * are also available at http://curl.haxx.se/docs/copyright.html.
- *
- * You may opt to use, copy, modify, merge, publish, distribute and/or sell
- * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the COPYING file.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- * $Id: curl.h,v 1.1 2006/07/09 22:41:14 fred_t_hamster Exp $
- ***************************************************************************/
-
-/* If you have problems, all libcurl docs and details are found here:
- http://curl.haxx.se/libcurl/
-*/
-
-#include "curlver.h" /* the libcurl version defines */
-
-#include <stdio.h>
-#include <limits.h>
-
-/* The include stuff here below is mainly for time_t! */
-#ifdef vms
-# include <types.h>
-# include <time.h>
-#else
-# include <sys/types.h>
-# include <time.h>
-#endif /* defined (vms) */
-
-typedef void CURL;
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- * Decorate exportable functions for Win32 DLL linking.
- * This avoids using a .def file for building libcurl.dll.
- */
-#if (defined(WIN32) || defined(_WIN32)) && !defined(CURL_STATICLIB)
-#if defined(BUILDING_LIBCURL)
-#define CURL_EXTERN __declspec(dllexport)
-#else
-#define CURL_EXTERN __declspec(dllimport)
-#endif
-#else
-#define CURL_EXTERN
-#endif
-
-/*
- * We want the typedef curl_off_t setup for large file support on all
- * platforms. We also provide a CURL_FORMAT_OFF_T define to use in *printf
- * format strings when outputting a variable of type curl_off_t.
- */
-
-#if defined(_MSC_VER) || defined(__LCC__)
-/* MSVC */
-#ifdef _WIN32_WCE
- typedef long curl_off_t;
-#define CURL_FORMAT_OFF_T "%ld"
-#else
- typedef signed __int64 curl_off_t;
-#define CURL_FORMAT_OFF_T "%I64d"
-#endif
-#else /* _MSC_VER || __LCC__ */
-#if (defined(__GNUC__) && defined(WIN32)) || defined(__WATCOMC__)
-/* gcc on windows or Watcom */
- typedef long long curl_off_t;
-#define CURL_FORMAT_OFF_T "%I64d"
-#else /* GCC or Watcom on Windows */
-
-/* "normal" POSIX approach, do note that this does not necessarily mean that
- the type is >32 bits, see the SIZEOF_CURL_OFF_T define for that! */
- typedef off_t curl_off_t;
-
-/* Check a range of defines to detect large file support. On Linux it seems
- none of these are set by default, so if you don't explicitly switches on
- large file support, this define will be made for "small file" support. */
-#ifndef _FILE_OFFSET_BITS
-#define _FILE_OFFSET_BITS 0 /* to prevent warnings in the check below */
-#define UNDEF_FILE_OFFSET_BITS
-#endif
-#ifndef FILESIZEBITS
-#define FILESIZEBITS 0 /* to prevent warnings in the check below */
-#define UNDEF_FILESIZEBITS
-#endif
-
-#if defined(_LARGE_FILES) || (_FILE_OFFSET_BITS > 32) || (FILESIZEBITS > 32) \
- || defined(_LARGEFILE_SOURCE) || defined(_LARGEFILE64_SOURCE)
- /* For now, we assume at least one of these to be set for large files to
- work! */
-#define CURL_FORMAT_OFF_T "%lld"
-#else /* LARGE_FILE support */
-#define CURL_FORMAT_OFF_T "%ld"
-#endif
-#endif /* GCC or Watcom on Windows */
-#endif /* _MSC_VER || __LCC__ */
-
-#ifdef UNDEF_FILE_OFFSET_BITS
-/* this was defined above for our checks, undefine it again */
-#undef _FILE_OFFSET_BITS
-#endif
-
-#ifdef UNDEF_FILESIZEBITS
-/* this was defined above for our checks, undefine it again */
-#undef FILESIZEBITS
-#endif
-
-struct curl_httppost {
- struct curl_httppost *next; /* next entry in the list */
- char *name; /* pointer to allocated name */
- long namelength; /* length of name length */
- char *contents; /* pointer to allocated data contents */
- long contentslength; /* length of contents field */
- char *buffer; /* pointer to allocated buffer contents */
- long bufferlength; /* length of buffer field */
- char *contenttype; /* Content-Type */
- struct curl_slist* contentheader; /* list of extra headers for this form */
- struct curl_httppost *more; /* if one field name has more than one
- file, this link should link to following
- files */
- long flags; /* as defined below */
-#define HTTPPOST_FILENAME (1<<0) /* specified content is a file name */
-#define HTTPPOST_READFILE (1<<1) /* specified content is a file name */
-#define HTTPPOST_PTRNAME (1<<2) /* name is only stored pointer
- do not free in formfree */
-#define HTTPPOST_PTRCONTENTS (1<<3) /* contents is only stored pointer
- do not free in formfree */
-#define HTTPPOST_BUFFER (1<<4) /* upload file from buffer */
-#define HTTPPOST_PTRBUFFER (1<<5) /* upload file from pointer contents */
-
- char *showfilename; /* The file name to show. If not set, the
- actual file name will be used (if this
- is a file part) */
-};
-
-typedef int (*curl_progress_callback)(void *clientp,
- double dltotal,
- double dlnow,
- double ultotal,
- double ulnow);
-
- /* Tests have proven that 20K is a very bad buffer size for uploads on
- Windows, while 16K for some odd reason performed a lot better. */
-#define CURL_MAX_WRITE_SIZE 16384
-
-typedef size_t (*curl_write_callback)(char *buffer,
- size_t size,
- size_t nitems,
- void *outstream);
-
-/* This is a return code for the read callback that, when returned, will
- signal libcurl to immediately abort the current transfer. */
-#define CURL_READFUNC_ABORT 0x10000000
-typedef size_t (*curl_read_callback)(char *buffer,
- size_t size,
- size_t nitems,
- void *instream);
-
-
-#ifndef CURL_NO_OLDIES
- /* not used since 7.10.8, will be removed in a future release */
-typedef int (*curl_passwd_callback)(void *clientp,
- const char *prompt,
- char *buffer,
- int buflen);
-#endif
-
-typedef enum {
- CURLIOE_OK, /* I/O operation successful */
- CURLIOE_UNKNOWNCMD, /* command was unknown to callback */
- CURLIOE_FAILRESTART, /* failed to restart the read */
- CURLIOE_LAST /* never use */
-} curlioerr;
-
-typedef enum {
- CURLIOCMD_NOP, /* no operation */
- CURLIOCMD_RESTARTREAD, /* restart the read stream from start */
- CURLIOCMD_LAST /* never use */
-} curliocmd;
-
-typedef curlioerr (*curl_ioctl_callback)(CURL *handle,
- int cmd,
- void *clientp);
-
-/*
- * The following typedef's are signatures of malloc, free, realloc, strdup and
- * calloc respectively. Function pointers of these types can be passed to the
- * curl_global_init_mem() function to set user defined memory management
- * callback routines.
- */
-typedef void *(*curl_malloc_callback)(size_t size);
-typedef void (*curl_free_callback)(void *ptr);
-typedef void *(*curl_realloc_callback)(void *ptr, size_t size);
-typedef char *(*curl_strdup_callback)(const char *str);
-typedef void *(*curl_calloc_callback)(size_t nmemb, size_t size);
-
-/* the kind of data that is passed to information_callback*/
-typedef enum {
- CURLINFO_TEXT = 0,
- CURLINFO_HEADER_IN, /* 1 */
- CURLINFO_HEADER_OUT, /* 2 */
- CURLINFO_DATA_IN, /* 3 */
- CURLINFO_DATA_OUT, /* 4 */
- CURLINFO_SSL_DATA_IN, /* 5 */
- CURLINFO_SSL_DATA_OUT, /* 6 */
- CURLINFO_END
-} curl_infotype;
-
-typedef int (*curl_debug_callback)
- (CURL *handle, /* the handle/transfer this concerns */
- curl_infotype type, /* what kind of data */
- char *data, /* points to the data */
- size_t size, /* size of the data pointed to */
- void *userptr); /* whatever the user please */
-
-/* All possible error codes from all sorts of curl functions. Future versions
- may return other values, stay prepared.
-
- Always add new return codes last. Never *EVER* remove any. The return
- codes must remain the same!
- */
-
-typedef enum {
- CURLE_OK = 0,
- CURLE_UNSUPPORTED_PROTOCOL, /* 1 */
- CURLE_FAILED_INIT, /* 2 */
- CURLE_URL_MALFORMAT, /* 3 */
- CURLE_URL_MALFORMAT_USER, /* 4 (NOT USED) */
- CURLE_COULDNT_RESOLVE_PROXY, /* 5 */
- CURLE_COULDNT_RESOLVE_HOST, /* 6 */
- CURLE_COULDNT_CONNECT, /* 7 */
- CURLE_FTP_WEIRD_SERVER_REPLY, /* 8 */
- CURLE_FTP_ACCESS_DENIED, /* 9 a service was denied by the FTP server
- due to lack of access - when login fails
- this is not returned. */
- CURLE_FTP_USER_PASSWORD_INCORRECT, /* 10 */
- CURLE_FTP_WEIRD_PASS_REPLY, /* 11 */
- CURLE_FTP_WEIRD_USER_REPLY, /* 12 */
- CURLE_FTP_WEIRD_PASV_REPLY, /* 13 */
- CURLE_FTP_WEIRD_227_FORMAT, /* 14 */
- CURLE_FTP_CANT_GET_HOST, /* 15 */
- CURLE_FTP_CANT_RECONNECT, /* 16 */
- CURLE_FTP_COULDNT_SET_BINARY, /* 17 */
- CURLE_PARTIAL_FILE, /* 18 */
- CURLE_FTP_COULDNT_RETR_FILE, /* 19 */
- CURLE_FTP_WRITE_ERROR, /* 20 */
- CURLE_FTP_QUOTE_ERROR, /* 21 */
- CURLE_HTTP_RETURNED_ERROR, /* 22 */
- CURLE_WRITE_ERROR, /* 23 */
- CURLE_MALFORMAT_USER, /* 24 - NOT USED */
- CURLE_FTP_COULDNT_STOR_FILE, /* 25 - failed FTP upload */
- CURLE_READ_ERROR, /* 26 - could open/read from file */
- CURLE_OUT_OF_MEMORY, /* 27 */
- CURLE_OPERATION_TIMEOUTED, /* 28 - the timeout time was reached */
- CURLE_FTP_COULDNT_SET_ASCII, /* 29 - TYPE A failed */
- CURLE_FTP_PORT_FAILED, /* 30 - FTP PORT operation failed */
- CURLE_FTP_COULDNT_USE_REST, /* 31 - the REST command failed */
- CURLE_FTP_COULDNT_GET_SIZE, /* 32 - the SIZE command failed */
- CURLE_HTTP_RANGE_ERROR, /* 33 - RANGE "command" didn't work */
- CURLE_HTTP_POST_ERROR, /* 34 */
- CURLE_SSL_CONNECT_ERROR, /* 35 - wrong when connecting with SSL */
- CURLE_BAD_DOWNLOAD_RESUME, /* 36 - couldn't resume download */
- CURLE_FILE_COULDNT_READ_FILE, /* 37 */
- CURLE_LDAP_CANNOT_BIND, /* 38 */
- CURLE_LDAP_SEARCH_FAILED, /* 39 */
- CURLE_LIBRARY_NOT_FOUND, /* 40 */
- CURLE_FUNCTION_NOT_FOUND, /* 41 */
- CURLE_ABORTED_BY_CALLBACK, /* 42 */
- CURLE_BAD_FUNCTION_ARGUMENT, /* 43 */
- CURLE_BAD_CALLING_ORDER, /* 44 - NOT USED */
- CURLE_INTERFACE_FAILED, /* 45 - CURLOPT_INTERFACE failed */
- CURLE_BAD_PASSWORD_ENTERED, /* 46 - NOT USED */
- CURLE_TOO_MANY_REDIRECTS , /* 47 - catch endless re-direct loops */
- CURLE_UNKNOWN_TELNET_OPTION, /* 48 - User specified an unknown option */
- CURLE_TELNET_OPTION_SYNTAX , /* 49 - Malformed telnet option */
- CURLE_OBSOLETE, /* 50 - NOT USED */
- CURLE_SSL_PEER_CERTIFICATE, /* 51 - peer's certificate wasn't ok */
- CURLE_GOT_NOTHING, /* 52 - when this is a specific error */
- CURLE_SSL_ENGINE_NOTFOUND, /* 53 - SSL crypto engine not found */
- CURLE_SSL_ENGINE_SETFAILED, /* 54 - can not set SSL crypto engine as
- default */
- CURLE_SEND_ERROR, /* 55 - failed sending network data */
- CURLE_RECV_ERROR, /* 56 - failure in receiving network data */
- CURLE_SHARE_IN_USE, /* 57 - share is in use */
- CURLE_SSL_CERTPROBLEM, /* 58 - problem with the local certificate */
- CURLE_SSL_CIPHER, /* 59 - couldn't use specified cipher */
- CURLE_SSL_CACERT, /* 60 - problem with the CA cert (path?) */
- CURLE_BAD_CONTENT_ENCODING, /* 61 - Unrecognized transfer encoding */
- CURLE_LDAP_INVALID_URL, /* 62 - Invalid LDAP URL */
- CURLE_FILESIZE_EXCEEDED, /* 63 - Maximum file size exceeded */
- CURLE_FTP_SSL_FAILED, /* 64 - Requested FTP SSL level failed */
- CURLE_SEND_FAIL_REWIND, /* 65 - Sending the data requires a rewind
- that failed */
- CURLE_SSL_ENGINE_INITFAILED, /* 66 - failed to initialise ENGINE */
- CURLE_LOGIN_DENIED, /* 67 - user, password or similar was not
- accepted and we failed to login */
- CURLE_TFTP_NOTFOUND, /* 68 - file not found on server */
- CURLE_TFTP_PERM, /* 69 - permission problem on server */
- CURLE_TFTP_DISKFULL, /* 70 - out of disk space on server */
- CURLE_TFTP_ILLEGAL, /* 71 - Illegal TFTP operation */
- CURLE_TFTP_UNKNOWNID, /* 72 - Unknown transfer ID */
- CURLE_TFTP_EXISTS, /* 73 - File already exists */
- CURLE_TFTP_NOSUCHUSER, /* 74 - No such user */
- CURL_LAST /* never use! */
-} CURLcode;
-
-typedef CURLcode (*curl_ssl_ctx_callback)(CURL *curl, /* easy handle */
- void *ssl_ctx, /* actually an
- OpenSSL SSL_CTX */
- void *userptr);
-
-/* Make a spelling correction for the operation timed-out define */
-#define CURLE_OPERATION_TIMEDOUT CURLE_OPERATION_TIMEOUTED
-
-#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all
- the obsolete stuff removed! */
-/* backwards compatibility with older names */
-#define CURLE_HTTP_NOT_FOUND CURLE_HTTP_RETURNED_ERROR
-#define CURLE_HTTP_PORT_FAILED CURLE_INTERFACE_FAILED
-#endif
-
-typedef enum {
- CURLPROXY_HTTP = 0,
- CURLPROXY_SOCKS4 = 4,
- CURLPROXY_SOCKS5 = 5
-} curl_proxytype;
-
-#define CURLAUTH_NONE 0 /* nothing */
-#define CURLAUTH_BASIC (1<<0) /* Basic (default) */
-#define CURLAUTH_DIGEST (1<<1) /* Digest */
-#define CURLAUTH_GSSNEGOTIATE (1<<2) /* GSS-Negotiate */
-#define CURLAUTH_NTLM (1<<3) /* NTLM */
-#define CURLAUTH_ANY ~0 /* all types set */
-#define CURLAUTH_ANYSAFE (~CURLAUTH_BASIC)
-
-#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all
- the obsolete stuff removed! */
-/* this was the error code 50 in 7.7.3 and a few earlier versions, this
- is no longer used by libcurl but is instead #defined here only to not
- make programs break */
-#define CURLE_ALREADY_COMPLETE 99999
-
-/* These are just to make older programs not break: */
-#define CURLE_FTP_PARTIAL_FILE CURLE_PARTIAL_FILE
-#define CURLE_FTP_BAD_DOWNLOAD_RESUME CURLE_BAD_DOWNLOAD_RESUME
-#endif
-
-#define CURL_ERROR_SIZE 256
-
-/* parameter for the CURLOPT_FTP_SSL option */
-typedef enum {
- CURLFTPSSL_NONE, /* do not attempt to use SSL */
- CURLFTPSSL_TRY, /* try using SSL, proceed anyway otherwise */
- CURLFTPSSL_CONTROL, /* SSL for the control connection or fail */
- CURLFTPSSL_ALL, /* SSL for all communication or fail */
- CURLFTPSSL_LAST /* not an option, never use */
-} curl_ftpssl;
-
-/* parameter for the CURLOPT_FTPSSLAUTH option */
-typedef enum {
- CURLFTPAUTH_DEFAULT, /* let libcurl decide */
- CURLFTPAUTH_SSL, /* use "AUTH SSL" */
- CURLFTPAUTH_TLS, /* use "AUTH TLS" */
- CURLFTPAUTH_LAST /* not an option, never use */
-} curl_ftpauth;
-
-/* long may be 32 or 64 bits, but we should never depend on anything else
- but 32 */
-#define CURLOPTTYPE_LONG 0
-#define CURLOPTTYPE_OBJECTPOINT 10000
-#define CURLOPTTYPE_FUNCTIONPOINT 20000
-#define CURLOPTTYPE_OFF_T 30000
-
-/* name is uppercase CURLOPT_<name>,
- type is one of the defined CURLOPTTYPE_<type>
- number is unique identifier */
-#ifdef CINIT
-#undef CINIT
-#endif
-/*
- * Figure out if we can use the ## operator, which is supported by ISO/ANSI C
- * and C++. Some compilers support it without setting __STDC__ or __cplusplus
- * so we need to carefully check for them too. We don't use configure-checks
- * for these since we want these headers to remain generic and working for all
- * platforms.
- */
-#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus) || \
- defined(__HP_aCC) || defined(__BORLANDC__) || defined(__LCC__)
- /* This compiler is believed to have an ISO compatible preprocessor */
-#define CURL_ISOCPP
-#else
- /* This compiler is believed NOT to have an ISO compatible preprocessor */
-#undef CURL_ISOCPP
-#endif
-
-#ifdef CURL_ISOCPP
-#define CINIT(name,type,number) CURLOPT_ ## name = CURLOPTTYPE_ ## type + number
-#else
-/* The macro "##" is ISO C, we assume pre-ISO C doesn't support it. */
-#define LONG CURLOPTTYPE_LONG
-#define OBJECTPOINT CURLOPTTYPE_OBJECTPOINT
-#define FUNCTIONPOINT CURLOPTTYPE_FUNCTIONPOINT
-#define OFF_T CURLOPTTYPE_OFF_T
-#define CINIT(name,type,number) CURLOPT_/**/name = type + number
-#endif
-
-/*
- * This macro-mania below setups the CURLOPT_[what] enum, to be used with
- * curl_easy_setopt(). The first argument in the CINIT() macro is the [what]
- * word.
- */
-
-typedef enum {
- /* This is the FILE * or void * the regular output should be written to. */
- CINIT(FILE, OBJECTPOINT, 1),
-
- /* The full URL to get/put */
- CINIT(URL, OBJECTPOINT, 2),
-
- /* Port number to connect to, if other than default. */
- CINIT(PORT, LONG, 3),
-
- /* Name of proxy to use. */
- CINIT(PROXY, OBJECTPOINT, 4),
-
- /* "name:password" to use when fetching. */
- CINIT(USERPWD, OBJECTPOINT, 5),
-
- /* "name:password" to use with proxy. */
- CINIT(PROXYUSERPWD, OBJECTPOINT, 6),
-
- /* Range to get, specified as an ASCII string. */
- CINIT(RANGE, OBJECTPOINT, 7),
-
- /* not used */
-
- /* Specified file stream to upload from (use as input): */
- CINIT(INFILE, OBJECTPOINT, 9),
-
- /* Buffer to receive error messages in, must be at least CURL_ERROR_SIZE
- * bytes big. If this is not used, error messages go to stderr instead: */
- CINIT(ERRORBUFFER, OBJECTPOINT, 10),
-
- /* Function that will be called to store the output (instead of fwrite). The
- * parameters will use fwrite() syntax, make sure to follow them. */
- CINIT(WRITEFUNCTION, FUNCTIONPOINT, 11),
-
- /* Function that will be called to read the input (instead of fread). The
- * parameters will use fread() syntax, make sure to follow them. */
- CINIT(READFUNCTION, FUNCTIONPOINT, 12),
-
- /* Time-out the read operation after this amount of seconds */
- CINIT(TIMEOUT, LONG, 13),
-
- /* If the CURLOPT_INFILE is used, this can be used to inform libcurl about
- * how large the file being sent really is. That allows better error
- * checking and better verifies that the upload was succcessful. -1 means
- * unknown size.
- *
- * For large file support, there is also a _LARGE version of the key
- * which takes an off_t type, allowing platforms with larger off_t
- * sizes to handle larger files. See below for INFILESIZE_LARGE.
- */
- CINIT(INFILESIZE, LONG, 14),
-
- /* POST input fields. */
- CINIT(POSTFIELDS, OBJECTPOINT, 15),
-
- /* Set the referer page (needed by some CGIs) */
- CINIT(REFERER, OBJECTPOINT, 16),
-
- /* Set the FTP PORT string (interface name, named or numerical IP address)
- Use i.e '-' to use default address. */
- CINIT(FTPPORT, OBJECTPOINT, 17),
-
- /* Set the User-Agent string (examined by some CGIs) */
- CINIT(USERAGENT, OBJECTPOINT, 18),
-
- /* If the download receives less than "low speed limit" bytes/second
- * during "low speed time" seconds, the operations is aborted.
- * You could i.e if you have a pretty high speed connection, abort if
- * it is less than 2000 bytes/sec during 20 seconds.
- */
-
- /* Set the "low speed limit" */
- CINIT(LOW_SPEED_LIMIT, LONG , 19),
-
- /* Set the "low speed time" */
- CINIT(LOW_SPEED_TIME, LONG, 20),
-
- /* Set the continuation offset.
- *
- * Note there is also a _LARGE version of this key which uses
- * off_t types, allowing for large file offsets on platforms which
- * use larger-than-32-bit off_t's. Look below for RESUME_FROM_LARGE.
- */
- CINIT(RESUME_FROM, LONG, 21),
-
- /* Set cookie in request: */
- CINIT(COOKIE, OBJECTPOINT, 22),
-
- /* This points to a linked list of headers, struct curl_slist kind */
- CINIT(HTTPHEADER, OBJECTPOINT, 23),
-
- /* This points to a linked list of post entries, struct HttpPost */
- CINIT(HTTPPOST, OBJECTPOINT, 24),
-
- /* name of the file keeping your private SSL-certificate */
- CINIT(SSLCERT, OBJECTPOINT, 25),
-
- /* password for the SSL-private key, keep this for compatibility */
- CINIT(SSLCERTPASSWD, OBJECTPOINT, 26),
- /* password for the SSL private key */
- CINIT(SSLKEYPASSWD, OBJECTPOINT, 26),
-
- /* send TYPE parameter? */
- CINIT(CRLF, LONG, 27),
-
- /* send linked-list of QUOTE commands */
- CINIT(QUOTE, OBJECTPOINT, 28),
-
- /* send FILE * or void * to store headers to, if you use a callback it
- is simply passed to the callback unmodified */
- CINIT(WRITEHEADER, OBJECTPOINT, 29),
-
- /* point to a file to read the initial cookies from, also enables
- "cookie awareness" */
- CINIT(COOKIEFILE, OBJECTPOINT, 31),
-
- /* What version to specifly try to use.
- See CURL_SSLVERSION defines below. */
- CINIT(SSLVERSION, LONG, 32),
-
- /* What kind of HTTP time condition to use, see defines */
- CINIT(TIMECONDITION, LONG, 33),
-
- /* Time to use with the above condition. Specified in number of seconds
- since 1 Jan 1970 */
- CINIT(TIMEVALUE, LONG, 34),
-
- /* 35 = OBSOLETE */
-
- /* Custom request, for customizing the get command like
- HTTP: DELETE, TRACE and others
- FTP: to use a different list command
- */
- CINIT(CUSTOMREQUEST, OBJECTPOINT, 36),
-
- /* HTTP request, for odd commands like DELETE, TRACE and others */
- CINIT(STDERR, OBJECTPOINT, 37),
-
- /* 38 is not used */
-
- /* send linked-list of post-transfer QUOTE commands */
- CINIT(POSTQUOTE, OBJECTPOINT, 39),
-
- /* Pass a pointer to string of the output using full variable-replacement
- as described elsewhere. */
- CINIT(WRITEINFO, OBJECTPOINT, 40),
-
- CINIT(VERBOSE, LONG, 41), /* talk a lot */
- CINIT(HEADER, LONG, 42), /* throw the header out too */
- CINIT(NOPROGRESS, LONG, 43), /* shut off the progress meter */
- CINIT(NOBODY, LONG, 44), /* use HEAD to get http document */
- CINIT(FAILONERROR, LONG, 45), /* no output on http error codes >= 300 */
- CINIT(UPLOAD, LONG, 46), /* this is an upload */
- CINIT(POST, LONG, 47), /* HTTP POST method */
- CINIT(FTPLISTONLY, LONG, 48), /* Use NLST when listing ftp dir */
-
- CINIT(FTPAPPEND, LONG, 50), /* Append instead of overwrite on upload! */
-
- /* Specify whether to read the user+password from the .netrc or the URL.
- * This must be one of the CURL_NETRC_* enums below. */
- CINIT(NETRC, LONG, 51),
-
- CINIT(FOLLOWLOCATION, LONG, 52), /* use Location: Luke! */
-
- CINIT(TRANSFERTEXT, LONG, 53), /* transfer data in text/ASCII format */
- CINIT(PUT, LONG, 54), /* HTTP PUT */
-
- /* 55 = OBSOLETE */
-
- /* Function that will be called instead of the internal progress display
- * function. This function should be defined as the curl_progress_callback
- * prototype defines. */
- CINIT(PROGRESSFUNCTION, FUNCTIONPOINT, 56),
-
- /* Data passed to the progress callback */
- CINIT(PROGRESSDATA, OBJECTPOINT, 57),
-
- /* We want the referer field set automatically when following locations */
- CINIT(AUTOREFERER, LONG, 58),
-
- /* Port of the proxy, can be set in the proxy string as well with:
- "[host]:[port]" */
- CINIT(PROXYPORT, LONG, 59),
-
- /* size of the POST input data, if strlen() is not good to use */
- CINIT(POSTFIELDSIZE, LONG, 60),
-
- /* tunnel non-http operations through a HTTP proxy */
- CINIT(HTTPPROXYTUNNEL, LONG, 61),
-
- /* Set the interface string to use as outgoing network interface */
- CINIT(INTERFACE, OBJECTPOINT, 62),
-
- /* Set the krb4 security level, this also enables krb4 awareness. This is a
- * string, 'clear', 'safe', 'confidential' or 'private'. If the string is
- * set but doesn't match one of these, 'private' will be used. */
- CINIT(KRB4LEVEL, OBJECTPOINT, 63),
-
- /* Set if we should verify the peer in ssl handshake, set 1 to verify. */
- CINIT(SSL_VERIFYPEER, LONG, 64),
-
- /* The CApath or CAfile used to validate the peer certificate
- this option is used only if SSL_VERIFYPEER is true */
- CINIT(CAINFO, OBJECTPOINT, 65),
-
- /* 66 = OBSOLETE */
- /* 67 = OBSOLETE */
-
- /* Maximum number of http redirects to follow */
- CINIT(MAXREDIRS, LONG, 68),
-
- /* Pass a long set to 1 to get the date of the requested document (if
- possible)! Pass a zero to shut it off. */
- CINIT(FILETIME, LONG, 69),
-
- /* This points to a linked list of telnet options */
- CINIT(TELNETOPTIONS, OBJECTPOINT, 70),
-
- /* Max amount of cached alive connections */
- CINIT(MAXCONNECTS, LONG, 71),
-
- /* What policy to use when closing connections when the cache is filled
- up */
- CINIT(CLOSEPOLICY, LONG, 72),
-
- /* 73 = OBSOLETE */
-
- /* Set to explicitly use a new connection for the upcoming transfer.
- Do not use this unless you're absolutely sure of this, as it makes the
- operation slower and is less friendly for the network. */
- CINIT(FRESH_CONNECT, LONG, 74),
-
- /* Set to explicitly forbid the upcoming transfer's connection to be re-used
- when done. Do not use this unless you're absolutely sure of this, as it
- makes the operation slower and is less friendly for the network. */
- CINIT(FORBID_REUSE, LONG, 75),
-
- /* Set to a file name that contains random data for libcurl to use to
- seed the random engine when doing SSL connects. */
- CINIT(RANDOM_FILE, OBJECTPOINT, 76),
-
- /* Set to the Entropy Gathering Daemon socket pathname */
- CINIT(EGDSOCKET, OBJECTPOINT, 77),
-
- /* Time-out connect operations after this amount of seconds, if connects
- are OK within this time, then fine... This only aborts the connect
- phase. [Only works on unix-style/SIGALRM operating systems] */
- CINIT(CONNECTTIMEOUT, LONG, 78),
-
- /* Function that will be called to store headers (instead of fwrite). The
- * parameters will use fwrite() syntax, make sure to follow them. */
- CINIT(HEADERFUNCTION, FUNCTIONPOINT, 79),
-
- /* Set this to force the HTTP request to get back to GET. Only really usable
- if POST, PUT or a custom request have been used first.
- */
- CINIT(HTTPGET, LONG, 80),
-
- /* Set if we should verify the Common name from the peer certificate in ssl
- * handshake, set 1 to check existence, 2 to ensure that it matches the
- * provided hostname. */
- CINIT(SSL_VERIFYHOST, LONG, 81),
-
- /* Specify which file name to write all known cookies in after completed
- operation. Set file name to "-" (dash) to make it go to stdout. */
- CINIT(COOKIEJAR, OBJECTPOINT, 82),
-
- /* Specify which SSL ciphers to use */
- CINIT(SSL_CIPHER_LIST, OBJECTPOINT, 83),
-
- /* Specify which HTTP version to use! This must be set to one of the
- CURL_HTTP_VERSION* enums set below. */
- CINIT(HTTP_VERSION, LONG, 84),
-
- /* Specificly switch on or off the FTP engine's use of the EPSV command. By
- default, that one will always be attempted before the more traditional
- PASV command. */
- CINIT(FTP_USE_EPSV, LONG, 85),
-
- /* type of the file keeping your SSL-certificate ("DER", "PEM", "ENG") */
- CINIT(SSLCERTTYPE, OBJECTPOINT, 86),
-
- /* name of the file keeping your private SSL-key */
- CINIT(SSLKEY, OBJECTPOINT, 87),
-
- /* type of the file keeping your private SSL-key ("DER", "PEM", "ENG") */
- CINIT(SSLKEYTYPE, OBJECTPOINT, 88),
-
- /* crypto engine for the SSL-sub system */
- CINIT(SSLENGINE, OBJECTPOINT, 89),
-
- /* set the crypto engine for the SSL-sub system as default
- the param has no meaning...
- */
- CINIT(SSLENGINE_DEFAULT, LONG, 90),
-
- /* Non-zero value means to use the global dns cache */
- CINIT(DNS_USE_GLOBAL_CACHE, LONG, 91), /* To becomeO BSOLETE soon */
-
- /* DNS cache timeout */
- CINIT(DNS_CACHE_TIMEOUT, LONG, 92),
-
- /* send linked-list of pre-transfer QUOTE commands (Wesley Laxton)*/
- CINIT(PREQUOTE, OBJECTPOINT, 93),
-
- /* set the debug function */
- CINIT(DEBUGFUNCTION, FUNCTIONPOINT, 94),
-
- /* set the data for the debug function */
- CINIT(DEBUGDATA, OBJECTPOINT, 95),
-
- /* mark this as start of a cookie session */
- CINIT(COOKIESESSION, LONG, 96),
-
- /* The CApath directory used to validate the peer certificate
- this option is used only if SSL_VERIFYPEER is true */
- CINIT(CAPATH, OBJECTPOINT, 97),
-
- /* Instruct libcurl to use a smaller receive buffer */
- CINIT(BUFFERSIZE, LONG, 98),
-
- /* Instruct libcurl to not use any signal/alarm handlers, even when using
- timeouts. This option is useful for multi-threaded applications.
- See libcurl-the-guide for more background information. */
- CINIT(NOSIGNAL, LONG, 99),
-
- /* Provide a CURLShare for mutexing non-ts data */
- CINIT(SHARE, OBJECTPOINT, 100),
-
- /* indicates type of proxy. accepted values are CURLPROXY_HTTP (default),
- CURLPROXY_SOCKS4 and CURLPROXY_SOCKS5. */
- CINIT(PROXYTYPE, LONG, 101),
-
- /* Set the Accept-Encoding string. Use this to tell a server you would like
- the response to be compressed. */
- CINIT(ENCODING, OBJECTPOINT, 102),
-
- /* Set pointer to private data */
- CINIT(PRIVATE, OBJECTPOINT, 103),
-
- /* Set aliases for HTTP 200 in the HTTP Response header */
- CINIT(HTTP200ALIASES, OBJECTPOINT, 104),
-
- /* Continue to send authentication (user+password) when following locations,
- even when hostname changed. This can potentionally send off the name
- and password to whatever host the server decides. */
- CINIT(UNRESTRICTED_AUTH, LONG, 105),
-
- /* Specificly switch on or off the FTP engine's use of the EPRT command ( it
- also disables the LPRT attempt). By default, those ones will always be
- attempted before the good old traditional PORT command. */
- CINIT(FTP_USE_EPRT, LONG, 106),
-
- /* Set this to a bitmask value to enable the particular authentications
- methods you like. Use this in combination with CURLOPT_USERPWD.
- Note that setting multiple bits may cause extra network round-trips. */
- CINIT(HTTPAUTH, LONG, 107),
-
- /* Set the ssl context callback function, currently only for OpenSSL ssl_ctx
- in second argument. The function must be matching the
- curl_ssl_ctx_callback proto. */
- CINIT(SSL_CTX_FUNCTION, FUNCTIONPOINT, 108),
-
- /* Set the userdata for the ssl context callback function's third
- argument */
- CINIT(SSL_CTX_DATA, OBJECTPOINT, 109),
-
- /* FTP Option that causes missing dirs to be created on the remote server */
- CINIT(FTP_CREATE_MISSING_DIRS, LONG, 110),
-
- /* Set this to a bitmask value to enable the particular authentications
- methods you like. Use this in combination with CURLOPT_PROXYUSERPWD.
- Note that setting multiple bits may cause extra network round-trips. */
- CINIT(PROXYAUTH, LONG, 111),
-
- /* FTP option that changes the timeout, in seconds, associated with
- getting a response. This is different from transfer timeout time and
- essentially places a demand on the FTP server to acknowledge commands
- in a timely manner. */
- CINIT(FTP_RESPONSE_TIMEOUT, LONG , 112),
-
- /* Set this option to one of the CURL_IPRESOLVE_* defines (see below) to
- tell libcurl to resolve names to those IP versions only. This only has
- affect on systems with support for more than one, i.e IPv4 _and_ IPv6. */
- CINIT(IPRESOLVE, LONG, 113),
-
- /* Set this option to limit the size of a file that will be downloaded from
- an HTTP or FTP server.
-
- Note there is also _LARGE version which adds large file support for
- platforms which have larger off_t sizes. See MAXFILESIZE_LARGE below. */
- CINIT(MAXFILESIZE, LONG, 114),
-
- /* See the comment for INFILESIZE above, but in short, specifies
- * the size of the file being uploaded. -1 means unknown.
- */
- CINIT(INFILESIZE_LARGE, OFF_T, 115),
-
- /* Sets the continuation offset. There is also a LONG version of this;
- * look above for RESUME_FROM.
- */
- CINIT(RESUME_FROM_LARGE, OFF_T, 116),
-
- /* Sets the maximum size of data that will be downloaded from
- * an HTTP or FTP server. See MAXFILESIZE above for the LONG version.
- */
- CINIT(MAXFILESIZE_LARGE, OFF_T, 117),
-
- /* Set this option to the file name of your .netrc file you want libcurl
- to parse (using the CURLOPT_NETRC option). If not set, libcurl will do
- a poor attempt to find the user's home directory and check for a .netrc
- file in there. */
- CINIT(NETRC_FILE, OBJECTPOINT, 118),
-
- /* Enable SSL/TLS for FTP, pick one of:
- CURLFTPSSL_TRY - try using SSL, proceed anyway otherwise
- CURLFTPSSL_CONTROL - SSL for the control connection or fail
- CURLFTPSSL_ALL - SSL for all communication or fail
- */
- CINIT(FTP_SSL, LONG, 119),
-
- /* The _LARGE version of the standard POSTFIELDSIZE option */
- CINIT(POSTFIELDSIZE_LARGE, OFF_T, 120),
-
- /* Enable/disable the TCP Nagle algorithm */
- CINIT(TCP_NODELAY, LONG, 121),
-
- /* 122 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
-
- /* When doing 3rd party transfer, set the source user and password with
- this */
- CINIT(SOURCE_USERPWD, OBJECTPOINT, 123),
-
- /* 124 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
- /* 125 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
- /* 126 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
-
- /* When doing 3rd party transfer, set the source pre-quote linked list
- of commands with this */
- CINIT(SOURCE_PREQUOTE, OBJECTPOINT, 127),
-
- /* When doing 3rd party transfer, set the source post-quote linked list
- of commands with this */
- CINIT(SOURCE_POSTQUOTE, OBJECTPOINT, 128),
-
- /* When FTP over SSL/TLS is selected (with CURLOPT_FTP_SSL), this option
- can be used to change libcurl's default action which is to first try
- "AUTH SSL" and then "AUTH TLS" in this order, and proceed when a OK
- response has been received.
-
- Available parameters are:
- CURLFTPAUTH_DEFAULT - let libcurl decide
- CURLFTPAUTH_SSL - try "AUTH SSL" first, then TLS
- CURLFTPAUTH_TLS - try "AUTH TLS" first, then SSL
- */
- CINIT(FTPSSLAUTH, LONG, 129),
-
- CINIT(IOCTLFUNCTION, FUNCTIONPOINT, 130),
- CINIT(IOCTLDATA, OBJECTPOINT, 131),
-
- /* To make a 3rd party transfer, set the source URL with this */
- CINIT(SOURCE_URL, OBJECTPOINT, 132),
-
- /* When doing 3rd party transfer, set the source quote linked list of
- commands with this */
- CINIT(SOURCE_QUOTE, OBJECTPOINT, 133),
-
- /* zero terminated string for pass on to the FTP server when asked for
- "account" info */
- CINIT(FTP_ACCOUNT, OBJECTPOINT, 134),
-
- /* feed cookies into cookie engine */
- CINIT(COOKIELIST, OBJECTPOINT, 135),
-
- /* ignore Content-Length */
- CINIT(IGNORE_CONTENT_LENGTH, LONG, 136),
-
- /* Set to non-zero to skip the IP address received in a 227 PASV FTP server
- response. Typically used for FTP-SSL purposes but is not restricted to
- that. libcurl will then instead use the same IP address it used for the
- control connection. */
- CINIT(FTP_SKIP_PASV_IP, LONG, 137),
-
- /* Select "file method" to use when doing FTP */
- CINIT(FTP_FILEMETHOD, LONG, 138),
-
- CURLOPT_LASTENTRY /* the last unused */
-} CURLoption;
-
- /* Below here follows defines for the CURLOPT_IPRESOLVE option. If a host
- name resolves addresses using more than one IP protocol version, this
- option might be handy to force libcurl to use a specific IP version. */
-#define CURL_IPRESOLVE_WHATEVER 0 /* default, resolves addresses to all IP
- versions that your system allows */
-#define CURL_IPRESOLVE_V4 1 /* resolve to ipv4 addresses */
-#define CURL_IPRESOLVE_V6 2 /* resolve to ipv6 addresses */
-
- /* three convenient "aliases" that follow the name scheme better */
-#define CURLOPT_WRITEDATA CURLOPT_FILE
-#define CURLOPT_READDATA CURLOPT_INFILE
-#define CURLOPT_HEADERDATA CURLOPT_WRITEHEADER
-
-#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all
- the obsolete stuff removed! */
-#define CURLOPT_HTTPREQUEST -1
-#define CURLOPT_FTPASCII CURLOPT_TRANSFERTEXT
-#define CURLOPT_MUTE -2
-#define CURLOPT_PASSWDFUNCTION -3
-#define CURLOPT_PASSWDDATA -4
-#define CURLOPT_CLOSEFUNCTION -5
-
-#define CURLOPT_SOURCE_HOST -6
-#define CURLOPT_SOURCE_PATH -7
-#define CURLOPT_SOURCE_PORT -8
-#define CURLOPT_PASV_HOST -9
-
-#else
-/* This is set if CURL_NO_OLDIES is defined at compile-time */
-#undef CURLOPT_DNS_USE_GLOBAL_CACHE /* soon obsolete */
-#endif
-
-
- /* These enums are for use with the CURLOPT_HTTP_VERSION option. */
-enum {
- CURL_HTTP_VERSION_NONE, /* setting this means we don't care, and that we'd
- like the library to choose the best possible
- for us! */
- CURL_HTTP_VERSION_1_0, /* please use HTTP 1.0 in the request */
- CURL_HTTP_VERSION_1_1, /* please use HTTP 1.1 in the request */
-
- CURL_HTTP_VERSION_LAST /* *ILLEGAL* http version */
-};
-
- /* These enums are for use with the CURLOPT_NETRC option. */
-enum CURL_NETRC_OPTION {
- CURL_NETRC_IGNORED, /* The .netrc will never be read.
- * This is the default. */
- CURL_NETRC_OPTIONAL, /* A user:password in the URL will be preferred
- * to one in the .netrc. */
- CURL_NETRC_REQUIRED, /* A user:password in the URL will be ignored.
- * Unless one is set programmatically, the .netrc
- * will be queried. */
- CURL_NETRC_LAST
-};
-
-enum {
- CURL_SSLVERSION_DEFAULT,
- CURL_SSLVERSION_TLSv1,
- CURL_SSLVERSION_SSLv2,
- CURL_SSLVERSION_SSLv3,
-
- CURL_SSLVERSION_LAST /* never use, keep last */
-};
-
-
-typedef enum {
- CURL_TIMECOND_NONE,
-
- CURL_TIMECOND_IFMODSINCE,
- CURL_TIMECOND_IFUNMODSINCE,
- CURL_TIMECOND_LASTMOD,
-
- CURL_TIMECOND_LAST
-} curl_TimeCond;
-
-#ifdef __BEOS__
-#include <support/SupportDefs.h>
-#endif
-
-
-/* curl_strequal() and curl_strnequal() are subject for removal in a future
- libcurl, see lib/README.curlx for details */
-CURL_EXTERN int (curl_strequal)(const char *s1, const char *s2);
-CURL_EXTERN int (curl_strnequal)(const char *s1, const char *s2, size_t n);
-
-/* name is uppercase CURLFORM_<name> */
-#ifdef CFINIT
-#undef CFINIT
-#endif
-
-#ifdef CURL_ISOCPP
-#define CFINIT(name) CURLFORM_ ## name
-#else
-/* The macro "##" is ISO C, we assume pre-ISO C doesn't support it. */
-#define CFINIT(name) CURLFORM_/**/name
-#endif
-
-typedef enum {
- CFINIT(NOTHING), /********* the first one is unused ************/
-
- /* */
- CFINIT(COPYNAME),
- CFINIT(PTRNAME),
- CFINIT(NAMELENGTH),
- CFINIT(COPYCONTENTS),
- CFINIT(PTRCONTENTS),
- CFINIT(CONTENTSLENGTH),
- CFINIT(FILECONTENT),
- CFINIT(ARRAY),
- CFINIT(OBSOLETE),
- CFINIT(FILE),
-
- CFINIT(BUFFER),
- CFINIT(BUFFERPTR),
- CFINIT(BUFFERLENGTH),
-
- CFINIT(CONTENTTYPE),
- CFINIT(CONTENTHEADER),
- CFINIT(FILENAME),
- CFINIT(END),
- CFINIT(OBSOLETE2),
-
- CURLFORM_LASTENTRY /* the last unusued */
-} CURLformoption;
-
-#undef CFINIT /* done */
-
-/* structure to be used as parameter for CURLFORM_ARRAY */
-struct curl_forms {
- CURLformoption option;
- const char *value;
-};
-
-/* use this for multipart formpost building */
-/* Returns code for curl_formadd()
- *
- * Returns:
- * CURL_FORMADD_OK on success
- * CURL_FORMADD_MEMORY if the FormInfo allocation fails
- * CURL_FORMADD_OPTION_TWICE if one option is given twice for one Form
- * CURL_FORMADD_NULL if a null pointer was given for a char
- * CURL_FORMADD_MEMORY if the allocation of a FormInfo struct failed
- * CURL_FORMADD_UNKNOWN_OPTION if an unknown option was used
- * CURL_FORMADD_INCOMPLETE if the some FormInfo is not complete (or error)
- * CURL_FORMADD_MEMORY if a HttpPost struct cannot be allocated
- * CURL_FORMADD_MEMORY if some allocation for string copying failed.
- * CURL_FORMADD_ILLEGAL_ARRAY if an illegal option is used in an array
- *
- ***************************************************************************/
-typedef enum {
- CURL_FORMADD_OK, /* first, no error */
-
- CURL_FORMADD_MEMORY,
- CURL_FORMADD_OPTION_TWICE,
- CURL_FORMADD_NULL,
- CURL_FORMADD_UNKNOWN_OPTION,
- CURL_FORMADD_INCOMPLETE,
- CURL_FORMADD_ILLEGAL_ARRAY,
- CURL_FORMADD_DISABLED, /* libcurl was built with this disabled */
-
- CURL_FORMADD_LAST /* last */
-} CURLFORMcode;
-
-/*
- * NAME curl_formadd()
- *
- * DESCRIPTION
- *
- * Pretty advanved function for building multi-part formposts. Each invoke
- * adds one part that together construct a full post. Then use
- * CURLOPT_HTTPPOST to send it off to libcurl.
- */
-CURL_EXTERN CURLFORMcode curl_formadd(struct curl_httppost **httppost,
- struct curl_httppost **last_post,
- ...);
-
-/*
- * NAME curl_formfree()
- *
- * DESCRIPTION
- *
- * Free a multipart formpost previously built with curl_formadd().
- */
-CURL_EXTERN void curl_formfree(struct curl_httppost *form);
-
-/*
- * NAME curl_getenv()
- *
- * DESCRIPTION
- *
- * Returns a malloc()'ed string that MUST be curl_free()ed after usage is
- * complete. DEPRECATED - see lib/README.curlx
- */
-CURL_EXTERN char *curl_getenv(const char *variable);
-
-/*
- * NAME curl_version()
- *
- * DESCRIPTION
- *
- * Returns a static ascii string of the libcurl version.
- */
-CURL_EXTERN char *curl_version(void);
-
-/*
- * NAME curl_escape()
- *
- * DESCRIPTION
- *
- * Escapes URL strings (converts all letters consider illegal in URLs to their
- * %XX versions). This function returns a new allocated string or NULL if an
- * error occurred.
- */
-CURL_EXTERN char *curl_escape(const char *string, int length);
-
-/*
- * NAME curl_unescape()
- *
- * DESCRIPTION
- *
- * Unescapes URL encoding in strings (converts all %XX codes to their 8bit
- * versions). This function returns a new allocated string or NULL if an error
- * occurred.
- */
-CURL_EXTERN char *curl_unescape(const char *string, int length);
-
-/*
- * NAME curl_free()
- *
- * DESCRIPTION
- *
- * Provided for de-allocation in the same translation unit that did the
- * allocation. Added in libcurl 7.10
- */
-CURL_EXTERN void curl_free(void *p);
-
-/*
- * NAME curl_global_init()
- *
- * DESCRIPTION
- *
- * curl_global_init() should be invoked exactly once for each application that
- * uses libcurl
- */
-CURL_EXTERN CURLcode curl_global_init(long flags);
-
-/*
- * NAME curl_global_init_mem()
- *
- * DESCRIPTION
- *
- * curl_global_init() or curl_global_init_mem() should be invoked exactly once
- * for each application that uses libcurl. This function can be used to
- * initialize libcurl and set user defined memory management callback
- * functions. Users can implement memory management routines to check for
- * memory leaks, check for mis-use of the curl library etc. User registered
- * callback routines with be invoked by this library instead of the system
- * memory management routines like malloc, free etc.
- */
-CURL_EXTERN CURLcode curl_global_init_mem(long flags,
- curl_malloc_callback m,
- curl_free_callback f,
- curl_realloc_callback r,
- curl_strdup_callback s,
- curl_calloc_callback c);
-
-/*
- * NAME curl_global_cleanup()
- *
- * DESCRIPTION
- *
- * curl_global_cleanup() should be invoked exactly once for each application
- * that uses libcurl
- */
-CURL_EXTERN void curl_global_cleanup(void);
-
-/* linked-list structure for the CURLOPT_QUOTE option (and other) */
-struct curl_slist {
- char *data;
- struct curl_slist *next;
-};
-
-/*
- * NAME curl_slist_append()
- *
- * DESCRIPTION
- *
- * Appends a string to a linked list. If no list exists, it will be created
- * first. Returns the new list, after appending.
- */
-CURL_EXTERN struct curl_slist *curl_slist_append(struct curl_slist *,
- const char *);
-
-/*
- * NAME curl_slist_free_all()
- *
- * DESCRIPTION
- *
- * free a previously built curl_slist.
- */
-CURL_EXTERN void curl_slist_free_all(struct curl_slist *);
-
-/*
- * NAME curl_getdate()
- *
- * DESCRIPTION
- *
- * Returns the time, in seconds since 1 Jan 1970 of the time string given in
- * the first argument. The time argument in the second parameter is unused
- * and should be set to NULL.
- */
-CURL_EXTERN time_t curl_getdate(const char *p, const time_t *unused);
-
-#define CURLINFO_STRING 0x100000
-#define CURLINFO_LONG 0x200000
-#define CURLINFO_DOUBLE 0x300000
-#define CURLINFO_SLIST 0x400000
-#define CURLINFO_MASK 0x0fffff
-#define CURLINFO_TYPEMASK 0xf00000
-
-typedef enum {
- CURLINFO_NONE, /* first, never use this */
- CURLINFO_EFFECTIVE_URL = CURLINFO_STRING + 1,
- CURLINFO_RESPONSE_CODE = CURLINFO_LONG + 2,
- CURLINFO_TOTAL_TIME = CURLINFO_DOUBLE + 3,
- CURLINFO_NAMELOOKUP_TIME = CURLINFO_DOUBLE + 4,
- CURLINFO_CONNECT_TIME = CURLINFO_DOUBLE + 5,
- CURLINFO_PRETRANSFER_TIME = CURLINFO_DOUBLE + 6,
- CURLINFO_SIZE_UPLOAD = CURLINFO_DOUBLE + 7,
- CURLINFO_SIZE_DOWNLOAD = CURLINFO_DOUBLE + 8,
- CURLINFO_SPEED_DOWNLOAD = CURLINFO_DOUBLE + 9,
- CURLINFO_SPEED_UPLOAD = CURLINFO_DOUBLE + 10,
- CURLINFO_HEADER_SIZE = CURLINFO_LONG + 11,
- CURLINFO_REQUEST_SIZE = CURLINFO_LONG + 12,
- CURLINFO_SSL_VERIFYRESULT = CURLINFO_LONG + 13,
- CURLINFO_FILETIME = CURLINFO_LONG + 14,
- CURLINFO_CONTENT_LENGTH_DOWNLOAD = CURLINFO_DOUBLE + 15,
- CURLINFO_CONTENT_LENGTH_UPLOAD = CURLINFO_DOUBLE + 16,
- CURLINFO_STARTTRANSFER_TIME = CURLINFO_DOUBLE + 17,
- CURLINFO_CONTENT_TYPE = CURLINFO_STRING + 18,
- CURLINFO_REDIRECT_TIME = CURLINFO_DOUBLE + 19,
- CURLINFO_REDIRECT_COUNT = CURLINFO_LONG + 20,
- CURLINFO_PRIVATE = CURLINFO_STRING + 21,
- CURLINFO_HTTP_CONNECTCODE = CURLINFO_LONG + 22,
- CURLINFO_HTTPAUTH_AVAIL = CURLINFO_LONG + 23,
- CURLINFO_PROXYAUTH_AVAIL = CURLINFO_LONG + 24,
- CURLINFO_OS_ERRNO = CURLINFO_LONG + 25,
- CURLINFO_NUM_CONNECTS = CURLINFO_LONG + 26,
- CURLINFO_SSL_ENGINES = CURLINFO_SLIST + 27,
- CURLINFO_COOKIELIST = CURLINFO_SLIST + 28,
- /* Fill in new entries below here! */
-
- CURLINFO_LASTONE = 28
-} CURLINFO;
-
-/* CURLINFO_RESPONSE_CODE is the new name for the option previously known as
- CURLINFO_HTTP_CODE */
-#define CURLINFO_HTTP_CODE CURLINFO_RESPONSE_CODE
-
-typedef enum {
- CURLCLOSEPOLICY_NONE, /* first, never use this */
-
- CURLCLOSEPOLICY_OLDEST,
- CURLCLOSEPOLICY_LEAST_RECENTLY_USED,
- CURLCLOSEPOLICY_LEAST_TRAFFIC,
- CURLCLOSEPOLICY_SLOWEST,
- CURLCLOSEPOLICY_CALLBACK,
-
- CURLCLOSEPOLICY_LAST /* last, never use this */
-} curl_closepolicy;
-
-#define CURL_GLOBAL_SSL (1<<0)
-#define CURL_GLOBAL_WIN32 (1<<1)
-#define CURL_GLOBAL_ALL (CURL_GLOBAL_SSL|CURL_GLOBAL_WIN32)
-#define CURL_GLOBAL_NOTHING 0
-#define CURL_GLOBAL_DEFAULT CURL_GLOBAL_ALL
-
-
-/*****************************************************************************
- * Setup defines, protos etc for the sharing stuff.
- */
-
-/* Different data locks for a single share */
-typedef enum {
- CURL_LOCK_DATA_NONE = 0,
- /* CURL_LOCK_DATA_SHARE is used internaly to say that
- * the locking is just made to change the internal state of the share
- * itself.
- */
- CURL_LOCK_DATA_SHARE,
- CURL_LOCK_DATA_COOKIE,
- CURL_LOCK_DATA_DNS,
- CURL_LOCK_DATA_SSL_SESSION,
- CURL_LOCK_DATA_CONNECT,
- CURL_LOCK_DATA_LAST
-} curl_lock_data;
-
-/* Different lock access types */
-typedef enum {
- CURL_LOCK_ACCESS_NONE = 0, /* unspecified action */
- CURL_LOCK_ACCESS_SHARED = 1, /* for read perhaps */
- CURL_LOCK_ACCESS_SINGLE = 2, /* for write perhaps */
- CURL_LOCK_ACCESS_LAST /* never use */
-} curl_lock_access;
-
-typedef void (*curl_lock_function)(CURL *handle,
- curl_lock_data data,
- curl_lock_access locktype,
- void *userptr);
-typedef void (*curl_unlock_function)(CURL *handle,
- curl_lock_data data,
- void *userptr);
-
-typedef void CURLSH;
-
-typedef enum {
- CURLSHE_OK, /* all is fine */
- CURLSHE_BAD_OPTION, /* 1 */
- CURLSHE_IN_USE, /* 2 */
- CURLSHE_INVALID, /* 3 */
- CURLSHE_NOMEM, /* out of memory */
- CURLSHE_LAST /* never use */
-} CURLSHcode;
-
-typedef enum {
- CURLSHOPT_NONE, /* don't use */
- CURLSHOPT_SHARE, /* specify a data type to share */
- CURLSHOPT_UNSHARE, /* specify shich data type to stop sharing */
- CURLSHOPT_LOCKFUNC, /* pass in a 'curl_lock_function' pointer */
- CURLSHOPT_UNLOCKFUNC, /* pass in a 'curl_unlock_function' pointer */
- CURLSHOPT_USERDATA, /* pass in a user data pointer used in the lock/unlock
- callback functions */
- CURLSHOPT_LAST /* never use */
-} CURLSHoption;
-
-CURL_EXTERN CURLSH *curl_share_init(void);
-CURL_EXTERN CURLSHcode curl_share_setopt(CURLSH *, CURLSHoption option, ...);
-CURL_EXTERN CURLSHcode curl_share_cleanup(CURLSH *);
-
-/****************************************************************************
- * Structures for querying information about the curl library at runtime.
- */
-
-typedef enum {
- CURLVERSION_FIRST,
- CURLVERSION_SECOND,
- CURLVERSION_THIRD,
- CURLVERSION_LAST /* never actually use this */
-} CURLversion;
-
-/* The 'CURLVERSION_NOW' is the symbolic name meant to be used by
- basicly all programs ever, that want to get version information. It is
- meant to be a built-in version number for what kind of struct the caller
- expects. If the struct ever changes, we redefine the NOW to another enum
- from above. */
-#define CURLVERSION_NOW CURLVERSION_THIRD
-
-typedef struct {
- CURLversion age; /* age of the returned struct */
- const char *version; /* LIBCURL_VERSION */
- unsigned int version_num; /* LIBCURL_VERSION_NUM */
- const char *host; /* OS/host/cpu/machine when configured */
- int features; /* bitmask, see defines below */
- const char *ssl_version; /* human readable string */
- long ssl_version_num; /* not used anymore, always 0 */
- const char *libz_version; /* human readable string */
- /* protocols is terminated by an entry with a NULL protoname */
- const char * const *protocols;
-
- /* The fields below this were added in CURLVERSION_SECOND */
- const char *ares;
- int ares_num;
-
- /* This field was aded in CURLVERSION_THIRD */
- const char *libidn;
-} curl_version_info_data;
-
-#define CURL_VERSION_IPV6 (1<<0) /* IPv6-enabled */
-#define CURL_VERSION_KERBEROS4 (1<<1) /* kerberos auth is supported */
-#define CURL_VERSION_SSL (1<<2) /* SSL options are present */
-#define CURL_VERSION_LIBZ (1<<3) /* libz features are present */
-#define CURL_VERSION_NTLM (1<<4) /* NTLM auth is supported */
-#define CURL_VERSION_GSSNEGOTIATE (1<<5) /* Negotiate auth support */
-#define CURL_VERSION_DEBUG (1<<6) /* built with debug capabilities */
-#define CURL_VERSION_ASYNCHDNS (1<<7) /* asynchronous dns resolves */
-#define CURL_VERSION_SPNEGO (1<<8) /* SPNEGO auth */
-#define CURL_VERSION_LARGEFILE (1<<9) /* supports files bigger than 2GB */
-#define CURL_VERSION_IDN (1<<10) /* International Domain Names support */
-#define CURL_VERSION_SSPI (1<<11) /* SSPI is supported */
-
-/*
- * NAME curl_version_info()
- *
- * DESCRIPTION
- *
- * This function returns a pointer to a static copy of the version info
- * struct. See above.
- */
-CURL_EXTERN curl_version_info_data *curl_version_info(CURLversion);
-
-/*
- * NAME curl_easy_strerror()
- *
- * DESCRIPTION
- *
- * The curl_easy_strerror function may be used to turn a CURLcode value
- * into the equivalent human readable error string. This is useful
- * for printing meaningful error messages.
- */
-CURL_EXTERN const char *curl_easy_strerror(CURLcode);
-
-/*
- * NAME curl_share_strerror()
- *
- * DESCRIPTION
- *
- * The curl_share_strerror function may be used to turn a CURLSHcode value
- * into the equivalent human readable error string. This is useful
- * for printing meaningful error messages.
- */
-CURL_EXTERN const char *curl_share_strerror(CURLSHcode);
-
-#ifdef __cplusplus
-}
-#endif
-
-/* unfortunately, the easy.h and multi.h include files need options and info
- stuff before they can be included! */
-#include "easy.h" /* nothing in curl is fun without the easy stuff */
-#include "multi.h"
-
-#endif /* __CURL_CURL_H */
projects / feisty_meow.git / commitdiff