+++ /dev/null
-
-// huffware script: slate reader, by fred huffhines
-//
-// uses the noteworthy library to read a set of notecards. the list of notecards
-// can be queried, and the current notecard's contents can be read aloud or sent
-// to a link as link messages.
-//
-// this script is licensed by the GPL v3 which is documented at: http://www.gnu.org/licenses/gpl.html
-// do not use it in objects without fully realizing you are implicitly accepting that license.
-//
-
-// global constants...
-
-string SLATE_SIGNATURE = "#slate";
- // the notecard must begin with this as its first line for it to be
- // recognized as our configuration card.
-
-// global variables...
-
-integer response_code; // set to uniquely identify the notecard read in progress.
-integer global_link_num; // which prim number to deliver the notecard contents to.
-
-// implements an API for moving between the active notecards.
-//////////////
-// do not redefine these constants.
-integer SLATE_READER_HUFFWARE_ID = 10028;
- // the unique id within the huffware system for the noteworthy script to
- // accept commands on. this is used in llMessageLinked as the num parameter.
-string HUFFWARE_PARM_SEPARATOR = "{~~~}";
- // this pattern is an uncommon thing to see in text, so we use it to separate
- // our commands in link messages.
-string HUFFWARE_ITEM_SEPARATOR = "{|||}";
- // used to separate lists of items from each other when stored inside a parameter.
- // this allows lists to be passed as single string parameters if needed.
-integer REPLY_DISTANCE = 100008; // offset added to service's huffware id in reply IDs.
-//////////////
-string RESET_SLATE_READER_COMMAND = "#rsslt";
- // causes the notecard information to be forgotten and the script restarted.
-string SR_GET_INFORMATION_COMMAND = "#infy";
- // used by clients to ask for information about the current number of notecards
- // available, and their names. this information is sent back on the huffware ID
- // plus the reply distance. first parm is the number, and the rest are the names.
-string SR_PLAY_CARD_COMMAND = "#playvo";
- // picks a particular notecard for reading and send the notecard's contents in a
- // series of link messages, using this command and the reply distance. there are
- // two parameters: an integer for the notecard number to read (from 0 through the
- // number of notecards - 1) and the link number to send the messages to.
-//////////////
-
-// requires noteworthy library v10.4 or better.
-//////////////
-// do not redefine these constants.
-integer NOTEWORTHY_HUFFWARE_ID = 10010;
- // the unique id within the huffware system for the noteworthy script to
- // accept commands on. this is used in llMessageLinked as the num parameter.
-//////////////
-string BAD_NOTECARD_INDICATOR = "bad_notecard";
- // indicates that the notecard reading process has failed to find an appropriate one.
-string NOTECARD_READ_CONTINUATION = "continue!";
- // returned as first parameter if there is still more data to handle.
-// commands available via the noteworthy library:
-string READ_NOTECARD_COMMAND = "#read_note#";
- // command used to tell the script to read notecards. needs a signature to find
- // in the card as the first parameter, and a randomly generated response code for
- // the second parameter. the response code is used to uniquely identify a set of
- // pending notecard readings (hopefully). the signature can be blank.
- // the results will be fired back as the string value returned, which will have
- // as first element the notecard's name (or BAD_NOTECARD_INDICATOR if none was
- // found) and as subsequent elements an embedded list that was read from the
- // notecard. this necessarily limits the size of the notecards that we can read
- // and return.
-string READ_SPECIFIC_NOTECARD_COMMAND = "#read_thisun#";
- // like the read notecard command, but specifies the notecard name to use. only that
- // specific notecard file will be consulted. first and second parm are still signature
- // and response code, third parm is the notecard name.
-//
-//////////////
-// joins a list of parameters using the parameter sentinel for the library.
-string wrap_parameters(list to_flatten)
-{ return llDumpList2String(to_flatten, HUFFWARE_PARM_SEPARATOR); }
-//////////////
-
-// this function fires off a request to the noteworthy library via a link message.
-// noteworthy will look for a notecard with our particular signature in it and
-// if it finds one, it will read the configuration therein. an empty string is
-// returned if noteworthy couldn't find anything.
-request_configuration(string note_name)
-{
- // try to find a notecard with our configuration.
- response_code = -1 * (integer)randomize_within_range(23, 80000, FALSE);
- string parms_sent = wrap_parameters([SLATE_SIGNATURE, response_code, note_name]);
- llMessageLinked(LINK_THIS, NOTEWORTHY_HUFFWARE_ID, READ_SPECIFIC_NOTECARD_COMMAND,
- parms_sent);
-}
-
-// provides the functions of the slate reader API.
-process_slate_requests(string msg, key id)
-{
- if (msg == RESET_SLATE_READER_COMMAND) {
- llResetScript();
- } else if (msg == SR_GET_INFORMATION_COMMAND) {
- list parms = [ llGetInventoryNumber(INVENTORY_NOTECARD) ];
- integer indy;
- for (indy = 0; indy < llGetInventoryNumber(INVENTORY_NOTECARD); indy++) {
- parms += llGetInventoryName(INVENTORY_NOTECARD, indy);
- }
- llMessageLinked(LINK_THIS, SLATE_READER_HUFFWARE_ID + REPLY_DISTANCE, msg,
- wrap_parameters(parms));
- } else if (msg == SR_PLAY_CARD_COMMAND) {
- list parms = llParseString2List(id, [HUFFWARE_PARM_SEPARATOR], []);
- integer note_number = llList2Integer(parms, 0);
- integer link_number = llList2Integer(parms, 1);
- initialize_reader(note_number, link_number);
- }
-}
-
-// processes link messages received from the noteworthy library.
-handle_link_message(integer which, integer num, string msg, key id)
-{
- if (num == SLATE_READER_HUFFWARE_ID) {
- process_slate_requests(msg, id);
- return;
- }
- if ( (num != NOTEWORTHY_HUFFWARE_ID + REPLY_DISTANCE)
- || (msg != READ_NOTECARD_COMMAND) )
- return; // not for us.
- // process the result of reading the notecard.
- list parms = llParseString2List(id, [HUFFWARE_PARM_SEPARATOR], []);
- string notecard_name = llList2String(parms, 0);
- integer response_for = llList2Integer(parms, 1);
- if (response_for != response_code) return; // oops, this isn't for us.
- if (notecard_name == BAD_NOTECARD_INDICATOR) {
- // we hated the notecards we found, or there were none.
- log_it("We apologize; there seem to be no notecards with a first line of '"
- + SLATE_SIGNATURE
- + "'. We can't read any configuration until that situation improves.");
- } else {
- // snag all but the first two elements for our config now.
- list config_list = llList2List(parms, 2, -1);
- // a valid notecard has been found.
- integer lines_to_say = llGetListLength(config_list);
- integer indy;
- for (indy = 0; indy < lines_to_say; indy++) {
- string line = llList2String(config_list, indy);
- if (!is_prefix(line, "#")) {
- llMessageLinked(global_link_num, SLATE_READER_HUFFWARE_ID + REPLY_DISTANCE,
- SR_PLAY_CARD_COMMAND, line);
- }
- }
- }
-}
-
-///////////////
-
-initialize_reader(integer note_number, integer link_number)
-{
- // reset our relevant variables.
- global_link_num = link_number;
-
- if (note_number >= llGetInventoryNumber(INVENTORY_NOTECARD)) {
- llSay(0, "Cannot initialize reader to notecard number " + (string)note_number + " because that is out of range.");
- return;
- }
- string notecard_name = llGetInventoryName(INVENTORY_NOTECARD, note_number);
-
- // request that the noteworthy library start looking for our notecard.
- request_configuration(notecard_name);
-}
-
-//////////////
-// from hufflets...
-//
-
-integer debug_num = 0;
-
-// a debugging output method. can be disabled entirely in one place.
-log_it(string to_say)
-{
- debug_num++;
- // tell this to the owner.
- llOwnerSay(llGetScriptName() + "[" + (string)debug_num + "] " + to_say);
- // say this on an unusual channel for chat if it's not intended for general public.
-// llSay(108, llGetScriptName() + "[" + (string)debug_num + "] " + to_say);
- // say this on open chat that anyone can hear. we take off the bling for this one.
-// llSay(0, to_say);
-}
-
-// locates the string "text" in the list to "search_in".
-integer find_in_list(list search_in, string text)
-{
- integer len = llGetListLength(search_in);
- integer i;
- for (i = 0; i < len; i++) {
- if (llList2String(search_in, i) == text)
- return i;
- }
- return -1;
-}
-
-// returns TRUE if the "prefix" string is the first part of "compare_with".
-integer is_prefix(string compare_with, string prefix)
-{ return (llSubStringIndex(compare_with, prefix) == 0); }
-
-// returns a number at most "maximum" and at least "minimum".
-// if "allow_negative" is TRUE, then the return may be positive or negative.
-float randomize_within_range(float minimum, float maximum, integer allow_negative)
-{
- if (minimum > maximum) {
- // flip the two if they are reversed.
- float temp = minimum; minimum = maximum; maximum = temp;
- }
- float to_return = minimum + llFrand(maximum - minimum);
- if (allow_negative) {
- if (llFrand(1.0) < 0.5) to_return *= -1.0;
- }
- return to_return;
-}
-
-// strips the spaces off of the beginning and end of a string.
-string strip_spaces(string to_strip)
-{
- // clean out initial spaces.
- while (llGetSubString(to_strip, 0, 0) == " ")
- to_strip = llDeleteSubString(to_strip, 0, 0);
- // clean out ending spaces.
- while (llGetSubString(to_strip, -1, -1) == " ")
- to_strip = llDeleteSubString(to_strip, -1, -1);
- return to_strip;
-}
-
-// locates the item with "name_to_find" in the inventory items with the "type".
-// a value from 0 to N-1 is returned if it's found, where N is the number of
-// items in the inventory.
-integer find_in_inventory(string name_to_find, integer inv_type)
-{
- integer num_inv = llGetInventoryNumber(inv_type);
- if (num_inv == 0) return -1; // nothing there!
- integer inv;
- for (inv = 0; inv < num_inv; inv++) {
- if (llGetInventoryName(inv_type, inv) == name_to_find)
- return inv;
- }
- return -2; // failed to find it.
-}
-
-//////////////
-// huffware script: auto-retire, by fred huffhines, version 2.8.
-// distributed under BSD-like license.
-// !! keep in mind that this code must be *copied* into another
-// !! script that you wish to add auto-retirement capability to.
-// when a script has auto_retire in it, it can be dropped into an
-// object and the most recent version of the script will destroy
-// all older versions.
-//
-// the version numbers are embedded into the script names themselves.
-// the notation for versions uses a letter 'v', followed by two numbers
-// in the form "major.minor".
-// major and minor versions are implicitly considered as a floating point
-// number that increases with each newer version of the script. thus,
-// "hazmap v0.1" might be the first script in the "hazmap" script continuum,
-// and "hazmap v3.2" is a more recent version.
-//
-// example usage of the auto-retirement script:
-// default {
-// state_entry() {
-// auto_retire(); // make sure newest addition is only version of script.
-// }
-// }
-// this script is partly based on the self-upgrading scripts from markov brodsky
-// and jippen faddoul.
-//////////////
-auto_retire() {
- string self = llGetScriptName(); // the name of this script.
- list split = compute_basename_and_version(self);
- if (llGetListLength(split) != 2) return; // nothing to do for this script.
- string basename = llList2String(split, 0); // script name with no version attached.
- string version_string = llList2String(split, 1); // the version found.
- integer posn;
- // find any scripts that match the basename. they are variants of this script.
- for (posn = llGetInventoryNumber(INVENTORY_SCRIPT) - 1; posn >= 0; posn--) {
- string curr_script = llGetInventoryName(INVENTORY_SCRIPT, posn);
- if ( (curr_script != self) && (llSubStringIndex(curr_script, basename) == 0) ) {
- // found a basic match at least.
- list inv_split = compute_basename_and_version(curr_script);
- if (llGetListLength(inv_split) == 2) {
- // see if this script is more ancient.
- string inv_version_string = llList2String(inv_split, 1); // the version found.
- // must make sure that the retiring script is completely the identical basename;
- // just matching in the front doesn't make it a relative.
- if ( (llList2String(inv_split, 0) == basename)
- && ((float)inv_version_string < (float)version_string) ) {
- // remove script with same name from inventory that has inferior version.
- llRemoveInventory(curr_script);
- }
- }
- }
- }
-}
-//
-// separates the base script name and version number. used by auto_retire.
-list compute_basename_and_version(string to_chop_up)
-{
- // minimum script name is 2 characters plus a version.
- integer space_v_posn;
- // find the last useful space and 'v' combo.
- for (space_v_posn = llStringLength(to_chop_up) - 3;
- (space_v_posn >= 2) && (llGetSubString(to_chop_up, space_v_posn, space_v_posn + 1) != " v");
- space_v_posn--) {
- // look for space and v but do nothing else.
- }
- if (space_v_posn < 2) return []; // no space found.
- // now we zoom through the stuff after our beloved v character and find any evil
- // space characters, which are most likely from SL having found a duplicate item
- // name and not so helpfully renamed it for us.
- integer indy;
- for (indy = llStringLength(to_chop_up) - 1; indy > space_v_posn; indy--) {
- if (llGetSubString(to_chop_up, indy, indy) == " ") {
- // found one; zap it. since we're going backwards we don't need to
- // adjust the loop at all.
- to_chop_up = llDeleteSubString(to_chop_up, indy, indy);
- }
- }
- string full_suffix = llGetSubString(to_chop_up, space_v_posn, -1);
- // ditch the space character for our numerical check.
- string chop_suffix = llGetSubString(full_suffix, 1, llStringLength(full_suffix) - 1);
- // strip out a 'v' if there is one.
- if (llGetSubString(chop_suffix, 0, 0) == "v")
- chop_suffix = llGetSubString(chop_suffix, 1, llStringLength(chop_suffix) - 1);
- // if valid floating point number and greater than zero, that works for our version.
- string basename = to_chop_up; // script name with no version attached.
- if ((float)chop_suffix > 0.0) {
- // this is a big success right here.
- basename = llGetSubString(to_chop_up, 0, -llStringLength(full_suffix) - 1);
- return [ basename, chop_suffix ];
- }
- // seems like we found nothing useful.
- return [];
-}
-//
-//////////////
-
-// end hufflets
-//////////////
-
-default {
- state_entry() { if (llSubStringIndex(llGetObjectName(), "huffotronic") < 0) state real_default; }
- on_rez(integer parm) { state rerun; }
-}
-state rerun { state_entry() { state default; } }
-
-state real_default
-{
- state_entry()
- {
- auto_retire();
- }
-
-// on_rez(integer parm) { llResetScript(); }
-
- // process the response from the noteworthy library.
- link_message(integer which, integer num, string msg, key id)
- { handle_link_message(which, num, msg, id); }
-}