+++ /dev/null
-
-// huffware script: wylie controller, by fred huffhines and wam7c macchi.
-//
-// accepts wylie input and distributes the command to the various parts of the letter.
-//
-// this script is licensed by the GPL v3 which is documented at: http://www.gnu.org/licenses/gpl.html
-// do not use it in objects without fully realizing you are implicitly accepting that license.
-//
-
-// configurable values... the settings below are just defaults.
-
-integer LISTENING_CHANNEL = 0; // the channel where we'll listen for commands.
-integer ONLY_LISTEN_TO_OWNER = FALSE; // if true, only the owner's voice counts.
-integer SHOW_CHANNEL = TRUE; // puts a title over our heads if true.
-vector TITLE_COLOR = <1.0, 1.0, 1.0>; // the color the title should be.
-
-integer DEBUGGING = FALSE; // if this is true, then the debugging will be noisy.
-
-// constants... do not change these.
-
-integer STARTUP_CODE_NOTECARD_RETRIES = 14042;
- // secret code used to launch the wylie writers with many notecard retries.
-
-// channels for speech / link messages.
-integer LOWER_VOWEL_CHANNEL = 11008;
-integer CONSONTANT_CHANNEL = 21008;
-integer UPPER_VOWEL_CHANNEL = 31008;
-
-string RESET_TEXTURE_WORD = "reset-texture";
- // tells the letter blocks to go back to default texture.
-string BROADCAST_WORD = "bcast";
- // used to tell many wylie writers to do something at the same time.
-
-string WYLIE_NOTEWORTHY_SIGNATURE = "#wylie";
- // the notecard must begin with this as its first line for it to be
- // recognized as our configuration card.
-
-integer SNOOZE_BEFORE_CONFIG_RESET = 14;
- // number of seconds to wait before trying to read notecard again.
-
-// requires noteworthy library v10.2 or better.
-//////////////
-// do not redefine these constants.
-integer NOTEWORTHY_HUFFWARE_ID = 10010;
- // the unique id within the huffware system for the noteworthy script to
- // accept commands on. this is used in llMessageLinked as the num parameter.
-string HUFFWARE_PARM_SEPARATOR = "{~~~}";
- // this pattern is an uncommon thing to see in text, so we use it to separate
- // our commands in link messages.
-string HUFFWARE_ITEM_SEPARATOR = "{|||}";
- // used to separate lists of items from each other when stored inside a parameter.
- // this allows lists to be passed as single string parameters if needed.
-integer REPLY_DISTANCE = 100008; // offset added to service's huffware id in reply IDs.
-string NOTECARD_READ_CONTINUATION = "continue!";
- // returned as first parameter if there is still more data to handle.
-string BAD_NOTECARD_INDICATOR = "bad_notecard";
- // indicates that the notecard reading process has failed to find an appropriate one.
-string BUSY_READING_INDICATOR = "busy_already";
- // this return value indicates that the script is already in use by some other script.
- // the calling script should try again later.
-// commands available via the noteworthy library:
-string READ_NOTECARD_COMMAND = "#read_note#";
- // command used to tell the script to read notecards. needs a signature to find
- // in the card as the first parameter, and a randomly generated response code for
- // the second parameter. the response code is used to uniquely identify a set of
- // pending notecard readings (hopefully). the signature can be empty or missing.
- // the results will be fired back as the string value returned, which will have
- // as first element the notecard's name (or "bad_notecard" if none was found) and
- // as subsequent elements an embedded list that was read from the notecard. this
- // necessarily limits the size of the notecards that we can read and return.
-//
-//////////////
-
-// global variables that track notecard reading and any configuration found.
-string global_notecard_name; // name of our notecard in the object's inventory.
-integer response_code; // set to uniquely identify the notecard read in progress.
-list global_config_list; // a collection of configuration parameters from our notecard.
-integer global_config_index; // allows wrap-around feature, which we don't use here.
-
-integer startup_parm = 0; // the startup parameter for the script.
-integer retries_allowed = 1; // number of attempts to read notecards.
-
-// sets the object up.
-initialize_wylie()
-{
- // listen for commands from the appropriate person(s) on the right channel.
- key id = NULL_KEY;
- if (ONLY_LISTEN_TO_OWNER) id = llGetOwner();
- llListen(LISTENING_CHANNEL, "", id, "");
- // display a text title if we were configured to.
- float title_alpha = 1.0;
- if (!SHOW_CHANNEL || !LISTENING_CHANNEL) title_alpha = 0.0;
- llSetText("/" + (string)LISTENING_CHANNEL, TITLE_COLOR, title_alpha);
- if (LISTENING_CHANNEL) {
- // if we're not on open chat listen, then we still peek out on the
- // open chat channel for certain instructions.
- llListen(0, "", id, "");
- }
- llSetTimerEvent(SNOOZE_BEFORE_CONFIG_RESET); // snooze a bit, and try reading again.
-
- if (startup_parm == STARTUP_CODE_NOTECARD_RETRIES) {
-///hmmm: parameterize
- retries_allowed = 11;
- startup_parm = -3; // no longer allowed to hit unless we get restarted.
- }
- retries_allowed--;
-}
-
-// tells all the character blocks to go back to their default texture.
-reset_textures()
-{
- set_texture(LOWER_VOWEL_CHANNEL, RESET_TEXTURE_WORD);
- set_texture(CONSONTANT_CHANNEL, RESET_TEXTURE_WORD);
- set_texture(UPPER_VOWEL_CHANNEL, RESET_TEXTURE_WORD);
-}
-
-// makes one of the blocks show the tibetan character, if it knows it.
-set_texture(integer block_number, string tib_char_wylie)
-{
- llMessageLinked(LINK_SET, block_number, tib_char_wylie, NULL_KEY);
-}
-
-// find the vowel in the string provided and separate the word into its
-// components for each of the blocks (in the order: upper, middle, lower).
-list consume_wylie(string maybe_wylie_in)
-{
- string maybe_wylie = llToLower(maybe_wylie_in); // drop to lower case.
- // if it has a space in it, then it's not for us.
- integer posn = llSubStringIndex(maybe_wylie, " ");
- if (posn >= 0) return []; // wrong answer.
- list vowels = [ "a", "e", "i", "o", "u" ];
- integer vow_indy;
- for (vow_indy = 0; vow_indy < llGetListLength(vowels); vow_indy++) {
- string curr_vow = llList2String(vowels, vow_indy);
- posn = find_substring(maybe_wylie, curr_vow);
- if (posn >= 0) {
- // found one!
-// log_it("found the vowel " + curr_vow);
-
-//hmmm: here is where better logic would be needed to support multi-vowel words.
-
-//hmmm: here is also where better logic needed for processing words, with multiple chars.
-// that would just require splitting the remainder off instead of having the rule about
-// vowel must be at end.
-
- // compute the consonant portion.
- string consonant = llGetSubString(maybe_wylie, 0, posn - 1) + "a";
- // we guess that the consonant is about right already.
- // dratted special cases for specific characters.
- if (maybe_wylie == curr_vow + "h") consonant = "ah";
- else if (maybe_wylie == curr_vow) consonant = "a";
-// log_it("consonant now is " + consonant);
-
- // now calculate the right vowel(s) and where they live.
- string lower_vowel;
- string upper_vowel;
- if (curr_vow == "a") {
- // no extra vowel markers, since there's an 'a'.
- lower_vowel = RESET_TEXTURE_WORD;
- upper_vowel = RESET_TEXTURE_WORD;
- } else if (curr_vow == "u") {
- // our one vowel that goes below.
- lower_vowel = curr_vow;
- upper_vowel = RESET_TEXTURE_WORD;
- } else {
- // mainstream vowels fly high.
- lower_vowel = RESET_TEXTURE_WORD;
- upper_vowel = curr_vow;
- }
-// log_it("success, answering: " + upper_vowel + " / " + consonant + " / " + lower_vowel);
- return [ upper_vowel, consonant, lower_vowel ];
- }
-
- }
- // no vowel was found!?
- return [];
-}
-
-//////////////
-
-// joins a list of parameters using the parameter sentinel for the library.
-string wrap_parameters(list to_flatten)
-{ return llDumpList2String(to_flatten, HUFFWARE_PARM_SEPARATOR); }
-
-//////////////
-
-// this function fires off a request to the noteworthy library via a link message.
-// noteworthy will look for a notecard with our particular signature in it and
-// if it finds one, it will read the configuration therein. an empty string is
-// returned if noteworthy couldn't find anything.
-request_configuration()
-{
- global_notecard_name = ""; // reset any previous card.
- global_config_list = []; // toss previous contents.
- // try to find a notecard with our configuration.
- response_code = -1 * (integer)randomize_within_range(23, 80000, FALSE);
- string parms_sent = wrap_parameters([WYLIE_NOTEWORTHY_SIGNATURE, response_code]);
- llMessageLinked(LINK_THIS, NOTEWORTHY_HUFFWARE_ID, READ_NOTECARD_COMMAND,
- parms_sent);
-}
-
-// processes link messages received from the noteworthy library.
-integer handle_link_message(integer which, integer num, string msg, key id)
-{
-//log_it("got linkmsg: " + (string)which + " - " + (string)num + " - " + msg);
- if (num != NOTEWORTHY_HUFFWARE_ID + REPLY_DISTANCE) return FALSE; // not for us.
- // process the result of reading the notecard.
- list parms = llParseString2List(id, [HUFFWARE_PARM_SEPARATOR], []);
- string notecard_name = llList2String(parms, 0);
- integer response_for = llList2Integer(parms, 1);
- if (response_for != response_code) return FALSE; // oops, this isn't for us.
- if (notecard_name == BAD_NOTECARD_INDICATOR) {
-// should we try again?
- return FALSE; // drop that one.
- }
-
- // a valid notecard has been found.
-//log_it("notecard name: " + notecard_name);
- // snag all but the first two elements for our config now.
- global_config_list += llList2List(parms, 2, -1);
- if (notecard_name == BUSY_READING_INDICATOR) {
- llSetTimerEvent(SNOOZE_BEFORE_CONFIG_RESET);
- return FALSE;
- } else if (notecard_name != NOTECARD_READ_CONTINUATION) {
- global_notecard_name = notecard_name; // record its name for later use.
- // now we're done reading, process the file as a set of definitions.
- global_config_index = 0; // we are starting over in the config list.
- process_ini_config();
- return TRUE;
- } else {
- // we're going to keep reading; notecard has more.
- llSetTimerEvent(SNOOZE_BEFORE_CONFIG_RESET);
- return FALSE;
- }
-}
-
-///////////////
-
-// consumes the notecard in a very application specific way to retrieve our configuration items.
-// the example script only looks for two variables: name and description. if those are found in
-// the sample card, then they are proudly shown.
-parse_variable_definition(string to_parse)
-{
-//log_it("parse_var: " + to_parse);
- string content; // filled after finding a variable name.
- if ( (content = get_variable_value(to_parse, "channel")) != "") {
- LISTENING_CHANNEL = (integer)content;
- } else if ( (content = get_variable_value(to_parse, "owner_only")) != "") {
- ONLY_LISTEN_TO_OWNER = (integer)content;
- } else if ( (content = get_variable_value(to_parse, "show_channel")) != "") {
- SHOW_CHANNEL = (integer)content;
- } else if ( (content = get_variable_value(to_parse, "title_color")) != "") {
- TITLE_COLOR = (vector)content;
- }
-}
-
-initialize_notecard_reader()
-{
- // reset our relevant variables.
- global_notecard_name = "";
- global_config_list = [];
- global_config_index = 0;
- // reset our configurable constants to the defaults.
- LISTENING_CHANNEL = 0;
- ONLY_LISTEN_TO_OWNER = FALSE;
- SHOW_CHANNEL = TRUE;
- TITLE_COLOR = <1.0, 1.0, 1.0>;
-
- // request that the noteworthy library start looking for our notecard.
- request_configuration();
-
- llSetTimerEvent(SNOOZE_BEFORE_CONFIG_RESET); // snooze a bit, and try reading again.
-}
-
-hear_the_voices(integer channel, string name, key id, string message)
-{
- if (ONLY_LISTEN_TO_OWNER && (id != llGetOwner())) return; // not valid from this guy.
- if (!channel && (id == llGetOwner())) {
-///&& LISTENING_CHANNEL &&
- // this is general chat, which is not our listening channel. we only
- // allow special owner commands here.
- if (is_prefix(message, BROADCAST_WORD)) {
- // whoa, they know the secret broadcasting code.
- channel = LISTENING_CHANNEL;
- // chop the bcast word, plus a space, from the command.
- message = llDeleteSubString(message, 0, llStringLength(BROADCAST_WORD));
- }
- }
- if (channel != LISTENING_CHANNEL) return; // this is not for us.
- if (message == "reset") {
- reset_textures();
- return;
- } else if ( (message == "self-destruct") && (id == llGetOwner())) {
- // this is going to send us to object heaven, we hope.
- llDie();
- }
- // wasn't a command to reset, so let's see if we know it.
- list chopped = consume_wylie(message);
- if (llGetListLength(chopped) != 3) return; // not understood as even close to wylie.
- set_texture(UPPER_VOWEL_CHANNEL, llList2String(chopped, 0));
- set_texture(CONSONTANT_CHANNEL, llList2String(chopped, 1));
- set_texture(LOWER_VOWEL_CHANNEL, llList2String(chopped, 2));
-}
-
-//////////////
-
-// from hufflets...
-
-integer debug_num = 0;
-
-// a debugging output method. can be disabled entirely in one place.
-log_it(string to_say)
-{
- debug_num++;
- // tell this to the owner.
- llOwnerSay(llGetScriptName() + "[" + (string)debug_num + "] " + to_say);
- // say this on an unusual channel for chat if it's not intended for general public.
-// llSay(108, llGetScriptName() + "[" + (string)debug_num + "] " + to_say);
- // say this on open chat that anyone can hear. we take off the bling for this one.
-// llSay(0, to_say);
-}
-
-// the string processing methods are not case sensitive.
-
-// returns TRUE if the "pattern" is found in the "full_string".
-integer matches_substring(string full_string, string pattern)
-{ return (find_substring(full_string, pattern) >= 0); }
-
-// returns the index of the first occurrence of "pattern" inside
-// the "full_string". if it is not found, then a negative number is returned.
-integer find_substring(string full_string, string pattern)
-{ return llSubStringIndex(llToLower(full_string), llToLower(pattern)); }
-
-// returns TRUE if the "prefix" string is the first part of "compare_with".
-integer is_prefix(string compare_with, string prefix)
-{ return find_substring(compare_with, prefix) == 0; }
-
-// strips the spaces off of the beginning and end of a string.
-string strip_spaces(string to_strip)
-{
- // clean out initial spaces.
- while (llGetSubString(to_strip, 0, 0) == " ")
- to_strip = llDeleteSubString(to_strip, 0, 0);
- // clean out ending spaces.
- while (llGetSubString(to_strip, -1, -1) == " ")
- to_strip = llDeleteSubString(to_strip, -1, -1);
- return to_strip;
-}
-
-// parses a variable definition to find the name of the variable and its value.
-// this returns two strings [X, Y], if "to_split" is in the form X=Y.
-list separate_variable_definition(string to_split)
-{
- integer equals_indy = llSubStringIndex(to_split, "=");
- // we don't support missing an equals sign, and we don't support it as the first character.
- if (equals_indy <= 0) return []; // no match.
- string x = llGetSubString(to_split, 0, equals_indy - 1);
- string y = llGetSubString(to_split, equals_indy + 1, -1);
- to_split = ""; // save space.
- return [ strip_spaces(x), strip_spaces(y) ];
-}
-
-// returns a non-empty string if "to_check" defines a value for "variable_name".
-// this must be in the form "X=Y", where X is the variable_name and Y is the value.
-string get_variable_value(string to_check, string variable_name)
-{
- list x_y = separate_variable_definition(to_check);
- if (llGetListLength(x_y) != 2) return ""; // failure to parse a variable def at all.
- if (!is_prefix(llList2String(x_y, 0), variable_name)) return ""; // no match.
- return llList2String(x_y, 1); // a match!
-}
-
-// returns a number at most "maximum" and at least "minimum".
-// if "allow_negative" is TRUE, then the return may be positive or negative.
-float randomize_within_range(float minimum, float maximum, integer allow_negative)
-{
- if (minimum > maximum) {
- // flip the two if they are reversed.
- float temp = minimum; minimum = maximum; maximum = temp;
- }
- float to_return = minimum + llFrand(maximum - minimum);
- if (allow_negative) {
- if (llFrand(1.0) < 0.5) to_return *= -1.0;
- }
- return to_return;
-}
-
-// examines all entries that we got from the notecard to see if any contain definitions.
-// this is basically an INI file reader, but it uses a list instead of a file.
-// ini files provide a format with multiple sections of config information, like so:
-// [section_1]
-// name1=value1
-// name2=value2 ...etc...
-// [section_2]
-// name1=value1 ...etc...
-process_ini_config()
-{
- integer indy;
- integer count = llGetListLength(global_config_list);
-
- // iterate across the items in our configuration to look for ones that are not done yet.
- for (indy = global_config_index; indy < count; indy++) {
- string line = llList2String(global_config_list, indy);
- // search for a section beginning.
- if (llGetSubString(line, 0, 0) == "[") {
- // we found the start of a section name. now read the contents.
- indy++; // skip section line.
- }
- integer sec_indy;
- for (sec_indy = indy; sec_indy < count; sec_indy++) {
- // read the lines in the section.
- line = llList2String(global_config_list, sec_indy);
- if (llGetSubString(line, 0, 0) != "[") {
- // try to interpret this line as a variable setting. this is just
- // one example of a way to handle the config file; one might instead
- // want to do something below once a whole section is read.
- parse_variable_definition(line);
- indy = sec_indy; // track that we've passed this line.
- } else {
- // we're at the beginning of a new section now, so start processing its
- // configuration in the outer loop.
- indy = sec_indy - 1; // set indy to proper beginning of section.
- global_config_index = indy; // remember where we had read to.
- sec_indy = count + 3; // skip remainder of inner loop.
- }
- }
- }
-
- global_config_index = 0; // reset outer position if want to re-read.
-}
-
-// locates the item with "name_to_find" in the inventory items with the "type".
-// a value from 0 to N-1 is returned if it's found, where N is the number of
-// items in the inventory.
-integer find_in_inventory(string name_to_find, integer inv_type)
-{
- integer num_inv = llGetInventoryNumber(inv_type);
- if (num_inv == 0) return -1; // nothing there!
- integer inv;
- for (inv = 0; inv < num_inv; inv++) {
- if (llGetInventoryName(inv_type, inv) == name_to_find)
- return inv;
- }
- return -2; // failed to find it.
-}
-
-//////////////
-
-//////////////
-// huffware script: auto-retire, by fred huffhines, version 2.5.
-// distributed under BSD-like license.
-// !! keep in mind that this code must be *copied* into another
-// !! script that you wish to add auto-retirement capability to.
-// when a script has auto_retire in it, it can be dropped into an
-// object and the most recent version of the script will destroy
-// all older versions.
-//
-// the version numbers are embedded into the script names themselves.
-// the notation for versions uses a letter 'v', followed by two numbers
-// in the form "major.minor".
-// major and minor versions are implicitly considered as a floating point
-// number that increases with each newer version of the script. thus,
-// "hazmap v0.1" might be the first script in the "hazmap" script continuum,
-// and "hazmap v3.2" is a more recent version.
-//
-// example usage of the auto-retirement script:
-// default {
-// state_entry() {
-// auto_retire(); // make sure newest addition is only version of script.
-// }
-// }
-// this script is partly based on the self-upgrading scripts from markov brodsky
-// and jippen faddoul.
-//////////////
-auto_retire() {
- string self = llGetScriptName(); // the name of this script.
- list split = compute_basename_and_version(self);
- if (llGetListLength(split) != 2) return; // nothing to do for this script.
- string basename = llList2String(split, 0); // script name with no version attached.
- string version_string = llList2String(split, 1); // the version found.
- integer posn;
- // find any scripts that match the basename. they are variants of this script.
- for (posn = llGetInventoryNumber(INVENTORY_SCRIPT) - 1; posn >= 0; posn--) {
- string curr_script = llGetInventoryName(INVENTORY_SCRIPT, posn);
- if ( (curr_script != self) && (llSubStringIndex(curr_script, basename) == 0) ) {
- // found a basic match at least.
- list inv_split = compute_basename_and_version(curr_script);
- if (llGetListLength(inv_split) == 2) {
- // see if this script is more ancient.
- string inv_version_string = llList2String(inv_split, 1); // the version found.
- // must make sure that the retiring script is completely the identical basename;
- // just matching in the front doesn't make it a relative.
- if ( (llList2String(inv_split, 0) == basename)
- && ((float)inv_version_string < (float)version_string) ) {
- // remove script with same name from inventory that has inferior version.
- llRemoveInventory(curr_script);
- }
- }
- }
- }
-}
-//
-// separates the base script name and version number. used by auto_retire.
-list compute_basename_and_version(string to_chop_up)
-{
- // minimum script name is 2 characters plus a version.
- integer space_v_posn;
- // find the last useful space and 'v' combo.
- for (space_v_posn = llStringLength(to_chop_up) - 3;
- (space_v_posn >= 2) && (llGetSubString(to_chop_up, space_v_posn, space_v_posn + 1) != " v");
- space_v_posn--) {
- // look for space and v but do nothing else.
- }
- if (space_v_posn < 2) return []; // no space found.
- // now we zoom through the stuff after our beloved v character and find any evil
- // space characters, which are most likely from SL having found a duplicate item
- // name and not so helpfully renamed it for us.
- integer indy;
- for (indy = llStringLength(to_chop_up) - 1; indy > space_v_posn; indy--) {
- if (llGetSubString(to_chop_up, indy, indy) == " ") {
- // found one; zap it. since we're going backwards we don't need to
- // adjust the loop at all.
- to_chop_up = llDeleteSubString(to_chop_up, indy, indy);
- }
- }
- string full_suffix = llGetSubString(to_chop_up, space_v_posn, -1);
- // ditch the space character for our numerical check.
- string chop_suffix = llGetSubString(full_suffix, 1, llStringLength(full_suffix) - 1);
- // strip out a 'v' if there is one.
- if (llGetSubString(chop_suffix, 0, 0) == "v")
- chop_suffix = llGetSubString(chop_suffix, 1, llStringLength(chop_suffix) - 1);
- // if valid floating point number and greater than zero, that works for our version.
- string basename = to_chop_up; // script name with no version attached.
- if ((float)chop_suffix > 0.0) {
- // this is a big success right here.
- basename = llGetSubString(to_chop_up, 0, -llStringLength(full_suffix) - 1);
- return [ basename, chop_suffix ];
- }
- // seems like we found nothing useful.
- return [];
-}
-//
-//////////////
-
-//defect in default state:
-// if no response from noteworthy library, infinite hang.
-
-default {
- state_entry() { if (llSubStringIndex(llGetObjectName(), "huffotronic") < 0) state real_default; }
- on_rez(integer parm) { startup_parm = parm; state rerun; }
-}
-state rerun { state_entry() { state default; } }
-
-state real_default
-{
- state_entry()
- {
- if (DEBUGGING) log_it("started, free mem=" + (string)llGetFreeMemory());
- auto_retire(); // make sure newest addition is only version of script.
- if (DEBUGGING) log_it("entered default state.");
- initialize_wylie();
- initialize_notecard_reader();
- }
-
- state_exit() { llSetTimerEvent(0); }
-
- // process the response from the noteworthy library.
- link_message(integer which, integer num, string msg, key id)
- {
- if (handle_link_message(which, num, msg, id))
- state ready_for_instructions;
- }
-
- // restart when we see changes to our notecard configuration.
- changed(integer change) {
- if (change & CHANGED_INVENTORY) {
- llSleep(4); // delay to avoid rez-time premature startup.
- if (DEBUGGING) log_it("restarting due to inv change.");
- state rerun;
- }
- }
-
- // invoked when the notecard reading has failed.
- timer() {
- if (global_notecard_name == "") {
- if (retries_allowed < 0) {
- if (DEBUGGING) log_it("ran out of retries, skipping reset.");
- state ready_for_instructions;
- }
- if (DEBUGGING) log_it("timed out, going back to default.");
- state default; // start over again.
- }
- }
-
- listen(integer channel, string name, key id, string message) {
- hear_the_voices(channel, name, id, message);
- }
-
- on_rez(integer parm) { startup_parm = parm; state rerun; }
-}
-
-state ready_for_instructions
-{
- state_entry() {
- if (DEBUGGING) log_it("entered ready_for_instructions state.");
- initialize_wylie();
- }
-
- state_exit() { llSetTimerEvent(0); }
-
- listen(integer channel, string name, key id, string message) {
- hear_the_voices(channel, name, id, message);
- }
-
- // reset when we see changes to our notecard configuration.
- changed(integer change) {
- if (change & CHANGED_INVENTORY) {
- if (DEBUGGING) log_it("inventory change seen; restarting");
- state rerun;
- }
- }
-
- on_rez(integer parm) { startup_parm = parm; state default; }
-}
projects / feisty_meow.git / blobdiff