# uncomment this to get extra noisy debugging.
#export DEBUG_TERM_TITLE=true
+##############
+
# puts a specific textual label on the terminal title bar.
# this doesn't consider any previous titles; it just labels the terminal.
# the title may not be visible in some window managers.
else
# not running interactively, so just echo the title.
sep
- echo ${title}
+ echo "${title}"
sep
fi
}
-# user friendly version that saves the title being added.
-function set_terminal_title()
+##############
+
+# records the current terminal title, pushing it down on the stack of titles,
+# possibly prior to a new one being used.
+function save_terminal_title()
{
- apply_title_to_terminal $*
+ local title="$*"
+
+ if [ -z "$title" ]; then
+ if [ ! -z "$DEBUG_TERM_TITLE" ]; then
+ echo "terminal_titler: empty title: pushing current title again"
+ fi
+ peek_title_stack
+ title="$LAST_TITLE"
+ if [ -z "$title" ]; then
+ log_feisty_meow_event "terminal_titler: there was no saved title, so we're ignoring the save attempt."
+ return 1
+ fi
+ fi
-#tricky tries to get it to be available when we ask for it in get_terminal_title
- sync
-# echo -n
+#hmmm: need a validation step here to remove bad chars that conflict with our title compression scheme.
+
+ # only slap a comma after the existing value if it wasn't empty.
+ if [ -z "$TERMINAL_TITLE_STACK" ]; then
+ export TERMINAL_TITLE_STACK="\"$title\""
+ else
+ export TERMINAL_TITLE_STACK="$TERMINAL_TITLE_STACK,\"$title\""
+ fi
-# # we're enforcing a new title from here on.
-# unset PRIOR_TERMINAL_TITLE
- save_terminal_title
+ if [ ! -z "$DEBUG_TERM_TITLE" ]; then
+ echo "terminal_titler: new terminal title stack is:"
+ echo "$TERMINAL_TITLE_STACK"
+ fi
}
-# echoes back the current title on the terminal window, if we can acquire it.
-function get_terminal_title()
+# takes a terminal title off the stack and sets the LAST_TITLE variable.
+function pop_title_stack()
{
- # this is an important value now; it is checked for in save_terminal_title.
- local term_title_found="unknown"
- # save the former terminal title if we're running in X with xterm.
- which xprop &>/dev/null
- if [ $? -eq 0 ]; then
- # make sure we're actually using xterm *and* that we have a window ID.
- if [[ "$TERM" =~ .*"xterm".* && ! -z "$WINDOWID" ]]; then
- term_title_found="$(xprop -id $WINDOWID | perl -nle 'print $1 if /^WM_NAME.+= \"(.*)\"$/')"
- fi
+ # whack our output variable, just in case.
+ unset LAST_TITLE
+ # get our stack top.
+ peek_title_stack
+ # trim the popped item out of the stack.
+ if [ ! -z "$TERMINAL_TITLE_STACK" ]; then
+ TERMINAL_TITLE_STACK="$(echo $TERMINAL_TITLE_STACK | sed -n -e 's/\(.*\),[^,]*$/\1/p')"
fi
- echo -n "$term_title_found"
}
-# reads the current terminal title, if possible, and saves it to our record.
-function save_terminal_title()
+# like pop, but does not change the stack, effectively handing you the most
+# recently set title.
+function peek_title_stack()
{
- local title="$(get_terminal_title)"
- if [ "$title" != "unknown" ]; then
- # there was a title, so save it.
- if [ ! -z "$DEBUG_TERM_TITLE" ]; then
- echo "saving prior terminal title as '$title'"
- fi
- export PRIOR_TERMINAL_TITLE="$title"
- else
- # the terminal had no title, or we couldn't access it, or there's no terminal.
- if [ ! -z "$DEBUG_TERM_TITLE" ]; then
- echo "not saving prior terminal title which was empty"
+ # whack our output variable, just in case.
+ unset LAST_TITLE
+
+ if [ ! -z "$TERMINAL_TITLE_STACK" ]; then
+ LAST_TITLE="$(echo $TERMINAL_TITLE_STACK | sed -n -e 's/.*","\([^,]*\)"$/\1/p')"
+ if [ -z "$LAST_TITLE" ]; then
+ LAST_TITLE="$(echo $TERMINAL_TITLE_STACK | sed -n -e 's/"//gp')"
fi
fi
}
# using our stored terminal title, this replaces the title on the terminal.
function restore_terminal_title()
{
-# we don't want to emit anything extra if this is being driven by git.
-#hmmm... this could be a problem?
-# if [ -z "$(echo $* | grep git)" ]; then
-
# run the terminal labeller to restore the prior title, if there was one.
- if [ ! -z "$PRIOR_TERMINAL_TITLE" ]; then
+ pop_title_stack
+
+ if [ ! -z "$LAST_TITLE" ]; then
if [ ! -z "$DEBUG_TERM_TITLE" ]; then
- echo "restoring prior terminal title of '$PRIOR_TERMINAL_TITLE'"
+ echo "terminal_titler: restoring prior terminal title of '$LAST_TITLE'"
+ echo "terminal_titler: while new title stack is: $TERMINAL_TITLE_STACK"
fi
- apply_title_to_terminal "$PRIOR_TERMINAL_TITLE"
+ apply_title_to_terminal "$LAST_TITLE"
fi
}
function label_terminal_with_info()
{
# we only label the terminal anew if there's no saved title.
- if [ -z "$PRIOR_TERMINAL_TITLE" ]; then
+ if [ -z "$TERMINAL_TITLE_STACK" ]; then
if [ ! -z "$DEBUG_TERM_TITLE" ]; then
- echo "showing new generated title since prior title was empty"
+ echo "terminal_titler: showing new generated title since prior title was empty"
fi
pruned_host=$(echo $HOSTNAME | sed -e 's/^\([^\.]*\)\..*$/\1/')
date_string=$(date +"%Y %b %e @ %T")
- user=$(logname)
+ user="$(fm_username)"
if [ -z "$user" ]; then
# try snagging the windoze name.
user=$USERNAME
fi
new_title="-- $user@$pruned_host -- [$date_string]"
apply_title_to_terminal "$new_title"
- save_terminal_title
+ save_terminal_title "$new_title"
else
# use the former title; paste it back up there just in case.
- if [ ! -z "$DEBUG_TERM_TITLE" ]; then
- echo "showing prior terminal title since there was a prior title!"
- echo "using prior terminal title of '$PRIOR_TERMINAL_TITLE'"
- fi
- apply_title_to_terminal "$PRIOR_TERMINAL_TITLE"
+ peek_title_stack
+ apply_title_to_terminal "$LAST_TITLE"
fi
}
+##############
+
+# user friendly version sets the terminal title and saves the title being added.
+function set_terminal_title()
+{
+ apply_title_to_terminal $*
+ save_terminal_title $*
+}
+
+##############
+
projects / feisty_meow.git / blobdiff