From: Chris Koeritz Date: Tue, 22 May 2018 01:12:10 +0000 (-0400) Subject: tasty updates moving towards v003 cakelampvm X-Git-Tag: 2.140.112^2~12 X-Git-Url: https://feistymeow.org/gitweb/?a=commitdiff_plain;h=95d2531eed9e94d6cc985e3107073ed6f905b458;p=feisty_meow.git tasty updates moving towards v003 cakelampvm --- diff --git a/production/sites/cakelampvm.com/docs/manual/cakelampvm_guide_v003.html b/production/sites/cakelampvm.com/docs/manual/cakelampvm_guide_v003.html new file mode 100644 index 00000000..fe42bc58 --- /dev/null +++ b/production/sites/cakelampvm.com/docs/manual/cakelampvm_guide_v003.html @@ -0,0 +1,683 @@ + + + + + Cake LAMP VM Documentation + + +

The cakelampvm VM:
+ Configuration and Usage

+
By Chris + Koeritz
+ feisty meow® concerns ltd.
+

Vintage: cakelampvm v003    + Updated: 2018-2-7 (rev. j)

+

The cakelampvm project provides a Virtualbox VM that acts as an "internet + in a bottle", serving up your web sites securely and only to your local + host.  The virtual machine provides DNS services (bind9), a Web server + (Apache2), + a full Ubuntu + Linux + desktop environment, the Fluxbox + X + window manager, and a suite of tools called the Feisty + Meow® codebase .  Together, these services provide you with a + very flexible and powerful testbed for web development, especially suited + for CakePHP.  + This VM was built with the assistance of and was partially funded by Saco Design of Winterport, + Maine.

+

Commands in fixed-width bold below are intended to be typed into a bash + shell running on the cakelampvm virtual machine.  The bash shell can + be obtained either by logging into the VM through ssh or by logging in + directly to the Virtualbox VM console.  You may find the ssh session + more convenient, because copy & paste features work as expected.

+

Commands preceded by a greater-than symbol ('>') are intended to be + run on the Host PC in a Windows command prompt (or in a bash prompt + running on the Host PC).

+

Guest VM Configuration

+ +

How to set up virtualbox for your host PC

+
    +
  1. Download and install virtualbox: https://www.virtualbox.org/wiki/Downloads
  2. +
  3. Install the extension pack for Virtualbox: This provides USB drivers + and other features.  This is installed on Virtualbox itself (on the + Host PC), not on the guests.
  4. +
      +
    1. Download the extension pack (also) at https://www.virtualbox.org/wiki/Downloads
    2. +
    3. Stop any running Virtualbox VMs.
    4. +
    5. Close the Virtualbox control panel.
    6. +
    7. Double-click on the downloaded extensions package (in a file + explorer) and Virtualbox should be launched to install it.
    8. +
    +
  5. Run the Virtualbox control panel.
  6. +
  7. Download the cakelampvm guest vm package and unzip it.  Store the + unzipped version in some appropriate place where you want the virtual + machine to reside on your host's hard drive.
  8. +
  9. Add the guest VM to your list of VMs.  From the Virtualbox menus, + choose the "Machine" menu and select "Add".  Point the selector + dialog at the cakelampvm folder you created above and open the + cakelampvm.vbox file.
  10. +
  11. Now the cakelampvm should show up in the list of virtual + machines.  Before starting it, perform the following network + configuration sections.
  12. +
+

Configure the Host-Only network on Virtualbox

+

Configuring host-only networking for the VM makes the VM completely local + to your machine.  The cakelampvm will not be accessible on the + internet or from the LAN, and can only be accessed by your host PC.  + This is a key component of security for your VM and your host PC, and is + considered a crucial configuration step.

+

Note: If the host-only or NAT network exist ahead of time, Virtualbox may + complain about them even if they have the correct configuration.  + This can be corrected simply by opening the cakelampvm settings and + selecting the appropriate network names again.

+

To configure the host-only network, follow these steps:

+
    +
  1. Go to virtual box "Preferences" (global preferences, not for a + specific vm).
  2. +
  3. Click on the "Network" tab.
  4. +
  5. Choose the "Host-only Networks" tab from within "Network".
  6. +
  7. Click the plus icon to add a new host-only network, or if there is + already a Host-only network, then edit it.
  8. +
  9. Set the "Adapter" parameters:
    + IPv4 Address: 10.28.42.1
    + IPv4 Network Mask: 255.255.255.0
    + IPv6 Address: (leave blank)
    + IPv6 Prefix Length: 0
    + Virtualbox will fill in the other details like so (this dialog may + differ between versions of virtualbox):
    +

    host only network adapter

    +
  10. +
  11. Set the "DHCP Server Settings" to disabled, e.g.
    + host only dhcp
    + This is disabled because we will be using statically assigned addresses + for convenience and stability.
  12. +
+

Additional information on host-only (and other) network adapter types is + at: https://www.virtualbox.org/manual/ch06.html#network_nat_service

+

Configure the NAT Network on Virtualbox

+

The NAT (Network Address Translation) network allows the VM to get off of + the machine and onto the internet safely.  It will use this interface + for any communication off of the host machine.  This is another + crucial component for the security of the VM and your host PC.  Since + the real IP address of the VM is hidden behind the NAT firewall on + Virtualbox, this keeps the VM safe from attackers, and hence your machine + stays safe as well.

+

To set up the NAT network, follow these steps:

+
    +
  1. Go to virtual box "Preferences" (global preferences, not for a + specific vm).
  2. +
  3. Click on the "Network" tab.
  4. +
  5. Choose the "Nat Networks" tab from within "Network".
  6. +
  7. Click the plus icon to add a new host-only network.
  8. +
  9. Set the "NAT Network Details" parameters:
    + Network Name: NatNetwork
    + Network CIDR: 10.0.2.0/24
    + Supports DHCP: checked
    + Supports IPv6: optionally checked
    + These are my settings, with IPv6 left disabled (this dialog may differ + between versions of virtualbox):
    + nat net config
  10. +
+

Starting up the VM and Connecting to It

+

★ This section requires that the VM is already configured properly for + Host-Only and NAT networks.

+

Using the Virtualbox interface, you should now be able to start your + virtual machine.  Virtualbox will complain if it detects any + remaining configuration problems in the VM.  The Linux boot sequence + will show many lines of text, before bringing up a black console window + with a login dialog.

+

If Windows complains about the Virtualbox application slamming into its + firewall, then allow the Virtualbox to get through.  Usually, telling + Windows that once is enough, but if any odd network access problems + result, edit the Windows firewall settings and allow Virtualbox to use + both "Public" and "Private" networks.  (Cortana can find the firewall + settings if you ask her about 'firewall'.  Within the firewall + configuration dialog, look for "Allow an app or feature through..." on the + left and configure Virtualbox from within that list.)

+ You can log in directly on the VM console with the developer account, but it + is generally more useful to connect to the cakelampvm over ssh.  If the + networking has been established properly, you should be able to do this + with: +
ssh developer@10.28.42.20
# or perform the equivalent connection with your ssh client.
+

And then provide the password to log in.

+

+ +

+

+ + ★ It is very important that the ssh connection is working properly before + proceeding to other configuration steps.  If ssh is not working, try + pinging the host:

+
ping 10.28.42.20
+

If the ping is also failing, then please re-check the two network + configuration sections above (for Host-Only networking and NAT + networking).  These are both required for the VM's network to + function as designed.

+

Optional: Once the DNS services are set up (discussed in detail below), + you will be able to run the much friendlier command:

+
ssh developer@cakelampvm.com
+

Key Forwarding to the VM

+

It is important to set up ssh key forwarding to enable your use of git + repositories while logged into the VM.  Key forwarding should be + enabled for the VM's two fake host identities:

+
cakelampvm.com
10.28.42.20
+

The details of configuring ssh key forwarding vary for each ssh + client.  For Linux ssh, the ~/.ssh/config file might contain + this information:

+
Host cakelampvm.com 10.28.42.20
  ForwardAgent yes
+
+

Updating cakelampvm to the Latest Model

+

★ This section requires that the VM is already configured and is + accessible via ssh.

+

argh: fix this info... +The cakelampvm v002 is released with the intention that it not need to be + released again.  Version 001 was not built with that explicit + intention, which then required the release of Version 002.  But we + hope to not need a v003 release...

+

There is an update feature built into the VM that is quite easy to + use.  The updates are driven by the feisty meow script repository in + conjunction with a local scripted command.  To activate the "update + process" for your VM, run the following commands on the VM, logged in as + the developer user:

+
# update to the latest version of feisty meow.
rpuffer $FEISTY_MEOW_APEX; regenerate
# enact any configuration changes needed, such as permissions and account setup. +revamp_cakelampvm
+ +

These two commands can be run at any time to patch up your VM to the + latest configuration.

+

Recent versions of feisty meow support a new "get_feisty" + command, which will behave the same as the first line above.  Once + you have run the "puffer..." command above for the first time (on + cakelampvm v002), this new command becomes available.

+ +

First Tasks as the Developer User

+

★ This section requires that the VM is already configured and is + accessible via ssh.

+

Here are some first steps that will make the vm your own.

+
    +
  1. Change your password for the developer account.  (This may + eventually be required and automatic.)  First, log into the VM with + ssh.  Then type this command:
    +
    passwd
    + The 'passwd' command will ask for your current password, and then for a + new password plus a verification of that new password.
    + You will probably want to change your samba password as well, which is + used when accessing the virtual machine over the network.  This is + a different, but very similar, command on Linux:
    +
    smbpasswd
    +  
  2. +
  3. Change your git configuration for the user and email address.  + This is how we've configured it so far:
    +
      +
    • +
      git config --global user.email "developer@cakelampvm.com"
      +
    • +
    • +
      git config --global user.name "Developer J. Cakemo"
      +
    • +
    + If you're developing on a real project, you probably don't want the + bogus email and even more bogus name above attached to your + commits.  Just run the two commands again but with proper values.
  4. +
+

Powering up with the Feisty Meow® scripts

+ The feisty meow scripts are a cohesive bash scripting environment for + getting a variety of tasks done.  The feisty meow scripts recently + incorporated the "avbash" collection from Saco Design and added those + scripts to a new "site_avenger" collection of scripts.  The site + avenger scripts provide tools for bringing up CakePHP web sites and managing + the collection of repositories for those sites.  Each website is + considered an "application", and the application name itself (e.g. + "winterportlibrary") can often provide all the details for "powering up" the + site.  The feisty meow team has added additional scripts for managing + DNS domains and Apache websites that provide the capability to "stand up" an + entire website around an application, with an accompanying DNS domain and an + Apache2 site definition. +

The site avenger scripts are documented separately within the feisty meow + codebase.  Consult the feisty +meow + readme file first, as it provides some valuable information on + configuring the codebase initially.  The site avenger script commands + are documented in the feisty + meow command reference file.

+

(The feisty meow codebase is already configured for the developer account + on the cakelampvm virtual machine.)

+

Using the guest VM's DNS services

+

★ This section requires that the VM is already configured and is + accessible via ssh.

+

The cakelampvm has been set up to provide a DNS server which will answer + name lookup requests on any of the sites that the cakelampvm is hosting + for you.  It will also serve as a general DNS server for any other + domains that need to be looked up.

+

To use the cakelampvm DNS, modify your host operating system network + configuration by adding or changing the DNS server to use the guest VM's + DNS service.  The cakelampvm is available at the local IP address + 10.28.42.20.  (The DNS server can be tested with nslookup, dig and + other tools.)

+

Note that the cakelampvm DNS should be listed first, if one intends to + override any DNS names that actually exist out on the internet.  + Further, we have found it most effective to have *only* the cakelampvm as + your DNS server, because a secondary DNS server can "take over" providing + the name lookups, and thus foul up DNS requests that should succeed for + your VM-hosted sites.

+

If your Host PC is running Windows, see the DNS configuration section + below that is tailored to that operating system.

+

Important Note: It behooves you to remember to switch back to a normal + DNS server configuration when you shut off the cakelampvm, or your machine + will not know the names of any sites on the internet any more!  The + official Google DNS servers are 8.8.8.8 and 8.8.4.4.

+

Once the DNS server is properly set up (by whatever means necessary), + these ping commands should get answering responses (from 10.28.42.20) on + both the cakelampvm VM and on your host PC.  Note: ping on Linux + keeps going forever, so hit control-C when you are tired of seeing the + pings:

+
ping cakelampvm.com
+ +
ping www.cakelampvm.com
+

Note that any other answer than 10.28.42.20 for the address is *bzzzt* + wrong, and means something needs to be fixed.

+

If these pings succeed (which hopefully they will!), then try accessing + the websites of each domain:

+
(browse to) http://cakelampvm.com
+
(browse to) http://mapsdemo.cakelampvm.com
+

These should show local sites on the VM rather than sites on the + internet.  If you instead get failures to find the domains, or if the + "real internet" site comes up for cakelampvm.com (the page covered with + red X marks and complaining), then the DNS is not hooked up properly yet.

+

Setting up DNS on Windows

+

The ipconfig tool will provide helpful information about your current + networking and DNS configuration:

+
> ipconfig /all
+

The DNS configuration on Windows is somewhat byzantine.  The pipe + characters ('|') below are used to separate the menus or tabs or dialogs + to traverse.  Follow this path to get to the DNS config:

+
Control Panel | Network & Internet | Network & Sharing | click WiFI or Ethernet link near top right | click Adapter Settings button...
 | click on the specific network device to modify | select Properties
+

Once the properties dialog is displayed, find "internet protocol version + 4" in the list and double click it.

+

Change the DNS setting from "obtain...automatically" to "use the + following dns addresses".

+

Enter 10.28.42.20 as the first DNS address and clear the second address + (all blanks).

+

Hit okay, then okay, then close, etc to back out of adapter + configuration.

+

Troubleshooting the DNS

+

If your pings are getting the wrong answers and you're certain the DNS + settings on your Host PC are right, then you may need to flush your DNS + cache, and that might be sufficient to start getting the right IP + address.  On Windows, the command for flushing DNS is:

+
> ipconfig /flushdns
+

and on Linux the flush DNS command can be many different things, but try + these two most common options:

+
# restarts the client side DNS cache.
sudo service dns-clean restart
+

or

+
# restarts the nscd caching server.
sudo service nscd restart
+ After, this try the pings again.  If they still fail, please go back + over your DNS configuration very carefully.  The cakelampvm's DNS + feature *does* actually work, but operating systems sometimes do their best + to deny this.
+

Host Key Issues for ssh

+

There is one caveat to be aware of when connecting to the cakelampvm.com + domain.  If you have accidentally added the "real" cakelampvm.com + domain from the internet to your ssh known_keys at some point, then ssh + will complain about connecting to the VM on the cakelampvm.com + domain.  This complaint will look like:

+
The authenticity of host 'cakelampvm.com (104.236.56.82)' can't be established.
+

Note that the IP address shown is not our beloved 10.28.42.20 local IP + address.

+

To fix this, remove the entry pointing at the "real" site from the + known_hosts file (ssh will print out the line number of the offending + entry).  The DNS configuration needs to be configured before you will + get the warning about the cakelampvm.com domain.  Up until then, the + domain name is always referring to the site out on the internet with the + red X's and warnings.  See the DNS configuration section below to + configure DNS the first time.

+

Once you connect to the VM and the ssh client records the VM's host key + in your known_hosts, then you're in good shape.  This state also + gives you a "canary in a coal mine" warning system...  Once the VM is + registered as a known host, then any attempt to connect back to the "real" + internet version of cakelampvm.com will garner a complaint from ssh.  + This version of the ssh warning should be heeded; you do not want to + connect to the real internet site, and the warning indicates that the host + PC is no longer using the DNS on the VM (since it reached the real + internet site instead of the VM).  That situation needs to be + corrected by running through the DNS configuration section again (and + testing the DNS until it is working).

+

Troubleshooting the Apache Sites

+

If your DNS pings and lookups are functioning properly, but you're just + not getting the right websites, then try clearing your browser's cache and + shutting the browser application down.  Then, start the browser up + and try the address again.  Often this cache dumping is enough to fix + the browser so that you start seeing the local website versions on + cakelampvm.com.

+

Editing files on the guest VM from the host

+

On the host computer, look for the guest vm as a networked computer + called cakelampvm.  This should provide some network shares using + Microsoft SMB protocol, and they can be attached to using the "developer" + user and its password.

+

On windows, one may want to mount this network location as a drive letter + for easier access.

+

Currently, the root of all web servers is exposed as "www".  Editing + the files in those folders requires ownership by the developer user.  + The existing mapsdemo site is owned by a different user ("fred") rather + than developer, mostly as a test case.  The "fred", "developer", and + "www-data" accounts on the VM have all been put into each others Unix + "groups" so that they can access each other's files, and thus you may not + notice any issues editing fred's files.

+

One should be able to create a new directory over the network also.  + Try creating a junk folder in the "www" folder, and then deleting it + again.  That should succeed, and this approach can be used to create + folders (from the Host PC) that are owned by the developer user (on the + VM).  You should be able to create folders or copy files within the + developer's home folder also ("/home/developer").

+

If you run into any permission problems that prevent file access, either + remotely or within the VM itself, then try running this command to fix + them (repeated from the section above about updating the cakelampvm):

+
revamp_cakelampvm
+

Afterwards, the www folder and others should allow the developer user to + create new folders at will.

+

Accessing files on the host PC from the guest VM

+

If you want to share a folder from the host to the guest, perhaps for + driver updates or other conveniences, then make the share with these + steps:

+
    +
  1. Create a folder on the host that is to be shared.
  2. +
  3. Right-click on the vm in Virtualbox manager and choose "Settings".
  4. +
  5. In the "Shared Folders" tab of the settings, go to "Machine Folders".
  6. +
  7. Click the folder plus icon to create a new share.
  8. +
  9. Fill in the "Folder Path" on the host PC to the folder that will be + shared, and give it a name for the guest.  We assume the folder + name will be "myshare".
  10. +
  11. On the guest vm, run the following commands to mount the share:
    +
    # make the guest's version of the shared folder
    mkdir ~/shared
    # mount the vm's share name onto the folder on the vm.
    sudo mount -t vboxsf myshare ~/shared
    +
  12. +
+

X11 applications launched from the VM

+

[incomplete section]

+

If a feature called "X forwarding" is enabled in your ssh client, then + you can start graphical applications on the VM and display them on your + local machine.  This works right away on most Linux hosts, but can + also work on PCs with X window system installed.  This section + describes how to set up Cygwin to run X server, which enables X11 + forwarding to your local display.

+

...{insert that info}...

+

Handy Techniques for Using cakelampvm

+

Assorted Guides and Cheat-Sheets

+

A Cheat sheet for the Vim editor (there are many of these available): https://vim.rtorr.com/

+

A git branching model that seems to work well: http://nvie.com/posts/a-successful-git-branching-model/

+

This is a basic guide to the Google Developer Console and API Key + management: Google + API Docs 

+

Using the "meld" Tool to Compare Files & Directories

+

Meld is a great comparison tool that displays differences between two + files or directories or directory trees in a graphical view.  Meld is + pre-installed on the VM.  This tool can be launched either in the + VM's X Windowing System (on the console) or if X11 forwarding is enabled.

+

To run meld, just type this command:

+
meld A B
+

where A and B are either both file names or they are both directory + names.  If A and B are directories, meld will compare the entire tree + structure between the two directories.  It allows one to copy from + one side to the other, even if the item that needs to be copied is an + entire subdirectory.

+

Get the network address on the guest vm

+

Run this command:

+
ifconfig
+

In the results, look for "inet addr".  + There may be more than one, if there are multiple network interfaces.

+

The standard IP address is 10.28.42.20 for the cakelampvm.

+

How to cleanly reboot or shut down the guest VM

+

When you've got the DNS and everything integrated, these commands will + manage the vm's state:

+

First, log into the guest VM:

+
ssh developer@cakelampvm.com
+

Then, to reboot the guest VM:

+
sudo reboot
+

Or, to halt the guest VM:

+
sudo shutdown -h now
+

Using these commands is kinder to the VM than just cycling the power from + the Virtualbox control panel.

+

Gritty Details of the Nitty Variety

+

This is the lowest level of plumbing for your VM.  Hopefully you + will not need to engage with this section.  The most useful doc + section here is the one below about the "Virtualbox guest additions", + which you will probably need at some future point.  Oracle releases + updates to the guest additions fairly regularly.

+

Configuring the guest VM

+

The guest VM should already be set up appropriately.  These steps + are provided for reference and updates.

+

Set up Virtualbox guest additions for the VM

+ This procedure is needed if the guest provides an older or incompatible + version of the guest additions (which have already been installed on the + guest vm).  It may also be necessary when a new version of the guest + additions becomes available. +
    +
  1. To install the guest additions, open the guest VM and have its window + in focus.
  2. +
  3. Choose the "Devices" menu and select "Insert Guest Additions CD + Image".  This will mount the CD's ISO image on the VM.
  4. +
  5. On the guest VM, it may be necessary to mount the CD image that's now + available:
    +
    sudo mount /dev/sr0 /media/cdrom
    +

    Linux will mention that the device is mounted "read-only".

    +
  6. +
  7. Since the VM currently has no windowing system installed, one must + start the Guest Additions install manually:
    +
    cd /media/cdrom
    sudo sh VBoxLinuxAdditions.run
    +
  8. +
  9. The latest Virtualbox guest additions should now be installed.
  10. +
+

Set up network adapters on guest VM

+

The network interfaces should already be configured on the guest within + the Virtualbox configuration.  This is available by clicking on the + VM in the Virtualbox manager and selecting "Settings".  These are the + configuration settings used:

+ Adapter 1:
+   Attached to: Host-only Adapter
+   Name: vboxnet0 
+

Adapter 2:
+   Attached to: Nat Network
+   Name: NatNetwork

+

On the guest VM itself, the network settings are specified in a file + called /etc/network/interfaces.  Here are the current contents of + that file:

+
source /etc/network/interfaces.d/*

auto lo
iface lo inet loopback

auto enp0s3
iface enp0s3 inet static
  address 10.28.42.20
  netmask 255.255.255.0
  network 10.28.42.0
  broadcast 10.28.42.255
  dns-domain cakelampvm.com
  dns-search cakelampvm.com
  dns-nameservers 127.0.0.1 8.8.8.8
+
auto enp0s8
+
iface enp0s8 inet dhcp
+

+

Compacting the VM Disk Image

+

To minimize the size used for the disk image, there are three major + steps.

+

1. While running the VM, run this command:

+
sudo apt clean
+

This throws away any cached data from the apt tool, which can be + substantial.

+

If there are other junk files you know of that can be removed, delete + those now also.

+

2. Reboot the VM to the gparted ISO image (available at the gparted + site) and run the following command:

+
sudo zerofree /dev/sda
+

This sets all free space to the zero byte, enabling Virtualbox to free + that space in the next step.

+

3. Shut the vm down after zerofree is complete and run this command on + the host PC (this is the Linux version of the command):

+
VBoxManage modifyhd --compact ~/cake_lamp_vm/cake-lamp-vm-hd.vdi
+

Replace the ~/cake_lamp_vm + path with the real VM storage path.  This command compacts the root + (and only) partition of the VM.

+

After these steps are complete, the VM should be its minimal size.

+

Adding a new website and domain on the guest VM

+

Note: these instructions, even the quick approaches below, pale in + comparison to the ease of use of the "standup" command in feisty meow's + site avenger scripts.  The standup command is detailed in the feisty + meow command reference document.  These instructions are for + situations when the domain or site is idiosyncratic in some way that + standup doesn't support.

+

To add a new website, you will first need to pick one of the DNS options + below (A or B) depending on how you want to name the site.  If the + DNS name of the site is contained within another existing domain (e.g., + "A.B.C" has subdomain A contained in domain B.C), use Option A.  If + the DNS name is a so-called "Second Level Domain" (SLD), then it stands on + its own (e.g., "B.C" is an SLD).

+

Once the DNS option has been picked and implemented, continue to the next + section of "Creating a New Apache Site".

+

For either Option A or Option B, first connect to the cakelampvm via ssh + as the developer user, e.g.: ssh developer@cakelampvm.com

+

DNS Option A: Adding a sub-domain in an existing domain

+

Let us say a customer needs an application called "excalibur".  It + will be a new subdomain within an existing domain, such as the + "cakelampvm.com" domain, meaning we want the VM to start answering + requests for "excalibur.cakelampvm.com".

+ Note that this option requires the containing domain "cakelampvm.com" to + already exist before adding the subdomain; see DNS Option B below for + details on how to add a containing domain for the first time. +

Quick approach: Use the feisty meow "add_domain" command.

+

Run this command in a bash shell on the VM:

+
add_domain excalibur.cakelampvm.com
+

Done.

+

Manual approach: Edit the bind9 configuration.

+

Note: the manual approach is not compatible with later use of feisty + meow's "remove_domain".

+ Execute the following command to edit the DNS file for the cakelampvm + domain: +
sudo vi /etc/bind/cakelampvm.com.conf
+

Add a stanza for the new site at the end of this file:

+
excalibur.cakelampvm.com.    IN A    10.28.42.20
        IN HINFO "linux server" "ubuntu"
+

Restart the DNS server:

+
sudo service bind9 restart
+

Afterwards, pinging excalibur.cakelampvm.com should work from both the + guest VM and the host PC.

+

DNS Option B: Using an entirely new domain for the site

+

This is a similar procedure to Option A, but we will create a totally new + config file for the new domain and add it to the bind directory.  For + this example, we need to add the site "excalibur.tv" into the DNS.

+

Quick approach: Use the feisty meow "add_domain" command.

+ Run this command in a bash shell on the VM: +
add_domain excalibur.tv
+

Done.

+

Manual approach: Edit a new DNS config file

+

Note: the manual approach is not compatible with later use of feisty + meow's "remove_domain".

+ Create a file called /etc/bind/excalibur.tv.conf for our new domain + excalibur.tv with these contents: +
$TTL 1W
@       IN SOA          @       fred.cakelampvm.com. (
                        2017100801      ; serial
                        2H              ; refresh
                        8M              ; retry
                        14D             ; expiry
                        6H )            ; minimum

        IN NS           ns.cakelampvm.com.
        IN MX   10      mail.cakelampvm.com.

# new SLD for our excalibur site.
excalibur.tv.                 IN A            10.28.42.20
                              IN HINFO        "linux server" "ubuntu"
+ The gnarly prefix stuff above the "excalibur.tv." listing establishes + configuration info for the new domain.  This file relies on the + existing cakelampvm.com infrastructure in DNS, such as the "ns" host, which + is the domain's name server.  However, the new domain does not + live inside the cakelampvm.com domain.
+

Now that the config file is in place, edit "/etc/bind/named.conf.local" + to add the new file by adding this bit of configuration at the end:

+
zone "excalibur.tv" in {
        file "/etc/bind/excalibur.tv.conf";
        type master;
        allow-query { any; };
};
+

Restart the DNS server:

+
sudo service bind9 restart
+

Afterwards, pinging excalibur.tv should work from both the guest and the + host.

+

Creating a New Apache Site

+

First, connect to the cakelampvm via ssh as the developer user, e.g.: ssh + developer@cakelampvm.com

+

Quick approach: Use the feisty meow "add_apache_site" command.

+

Run this command in a bash shell on the VM:

+
add_apache_site excalibur excalibur.tv
+

(The first parameter is the application name, the second is the domain + name.)

+

Done.

+

Manual approach: Edit an Apache config file

+

Note: the manual approach is not compatible with later use of feisty + meow's "remove_apache_site".

+

For Apache, the choice of DNS Option A or B, subdomain or SLD, does not + matter.  The site configuration file just has to accurately specify + the domain in question.

+

Start with the following template file for the new website, and modify it + for the appropriate host name and "DocumentRoot" path:

+
<VirtualHost *:80>
    ServerName excalibur.tv +    DocumentRoot /home/apps/excalibur
    ErrorLog ${APACHE_LOG_DIR}/excalibur.tv-error.log
    CustomLog ${APACHE_LOG_DIR}/excalibur.tv-access.log combined
    Include /etc/apache2/conf-library/basic-options.conf
    Include /etc/apache2/conf-library/rewrite-enabling.conf
</VirtualHost>
+

The above example is appropriate for our excalibur app in the + excalibur.tv domain (using DNS Option B).  Modifying the excalibur.tv + references in it (and the path in the DocumentRoot) is sufficient to + re-target it for any domain you want.

+

Copy the new site config file into "/etc/apache2/sites-available" with an + appropriate file name that includes the site's domain name.  We will + call our config file "excalibur.tv.conf".  If you developed the file + in your home folder, this would be the command to move it up to Apache:

+
sudo cp ~/excalibur.tv.conf /etc/apache2/sites-available
+

Then tell apache to use the new file:

+
sudo a2ensite excalibur.tv
# the '.conf' portion of the filename is unnecessary for this command.
+
+

Finally, restart apache to get it to begin serving the site:

+
sudo service apache2 restart
+

Test the new web site

+

Given the configuration above, your host PC should now be able to access + the new website on the domain "excalibur.tv".

+

To test this, first try pinging the new DNS name:

+
ping excalibur.tv
+

If there are responses to the ping *and* + the answer is 10.28.42.20, then it means the DNS is working.

+

If there are no responses or it's some other IP address talking back, + check the instructions in the above DNS sections.

+

Once the DNS is working, try browsing to the site at "http://excalibur.tv".  That should + at least bring up the configured site storage path, even if nothing is + being served from that folder yet.

+

If the new site is not showing up properly, try examining the apache logs + for any error messages that can be corrected.  The log files are + stored in "/var/log/apache2" and are named after the website (if + configured through the above process).

+

Notes on building the Cake Lamp VM

+

This is all work that should already have been done.  It is + mentioned here just as breadcrumbs for a future vm builder.

+ +


+

+ +
+

+ + diff --git a/production/sites/cakelampvm.com/index.html b/production/sites/cakelampvm.com/index.html index 66fc8d61..4fb472ff 100644 --- a/production/sites/cakelampvm.com/index.html +++ b/production/sites/cakelampvm.com/index.html @@ -15,7 +15,7 @@

This is the cakelampvm.com domain that is actually on the internet.

Official cakelampvm setup guide: The + target="_blank" href="docs/manual/cakelampvm_guide_v003.html">The cakelampvm.com VM: Configuration and Usage

uh oh red exclamation x marks a bad spot diff --git a/production/sites/cakelampvm.com/vm_index.html b/production/sites/cakelampvm.com/vm_index.html index 362b3215..f37b6b72 100644 --- a/production/sites/cakelampvm.com/vm_index.html +++ b/production/sites/cakelampvm.com/vm_index.html @@ -22,7 +22,7 @@ (as long as browser URL bar actually says just "http://cakelampvm.com" or "http://www.cakelampvm.com").

Official cakelampvm setup guide: The cakelampvm.com VM: + href="docs/manual/cakelampvm_guide_v003.html">The cakelampvm.com VM: Configuration and Usage

yay, green exclaimed you're in the right place, and dns is being hosted by your local cakelampvm.com virtual machine/dev/null <